The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-349-7782, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-349-7782 |
| Primary Part Number | AS623-06F0950 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES SECOND END |
| Measuring Method and Length | 95.000 INCHES NOMINAL OVERALL IN |
| Temp Rating | -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 5.000 INCHES IN |
| Connection Style | SWIVEL NUT, FLARELESS SECOND END |
| Connection Style | SWIVEL NUT, FLARELESS FIRST END |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Supplementary Features | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL,THE CURRENT APPROVED SOURCES,81343 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| Layer Composition and Location | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| Connection Type | THREADED INTERNAL TUBE SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.670 INCHES NOMINAL IN |
| Operating Pressure | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| End Fitting Component and Material | COMPLETE FITTING STEEL ALL ENDS |
| Thread Direction | RIGHT-HAND SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.562 INCHES SECOND END IN |
| Nominal Thread Size | 0.562 INCHES FIRST END IN |
| Seat Angle | 12.0 DEGREES SECOND END |
| Seat Angle | 12.0 DEGREES FIRST END |
| Inside Diameter | 0.312 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Hydrostatic Test Pressure | 6000.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3B SECOND END |
| Thread Class | 3B FIRST END |
| Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH LBS |
| Thread Series Designator | UNF FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AS623-06F0950 PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| SAE-AS604 | 3/1 Design control — primary reference Sae International Dba Sae International |
| AS604 | 5/9 Secondary reference Sae International Dba Sae International |
| MIL-H-38360 | 5/9 Secondary reference U.S. Government activity |
| 170M145-6CR-0950 | 5/9 Secondary reference U.S. Government activity |
| AS623-06F0950 | 5/9 Secondary reference U.S. Government activity |
| AS604 | 5/9 Secondary reference U.S. Government activity |
NSN 4720-01-349-7782 is a Hose Assembly,nonmetallic, manufactured by Sae International Dba Sae International, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-349-7782 has 1 manufacturer part number on file: AS623-06F0950 (Sae International Dba Sae International).
Key specifications for AS623-06F0950: Flow Angle: 90.0 DEGREES SECOND END; Measuring Method and Length: 95.000 INCHES NOMINAL OVERALL IN; Temp Rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 5.000 INCHES IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.