The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-345-5642, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-345-5642 |
| Primary Part Number | AS116-06-0086 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Flow Angle | 45.0 DEGREES SECOND END |
| Measuring Method and Length | 8.750 INCHES NOMINAL OVERALL IN |
| Temp Rating | -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 2.500 INCHES IN |
| Connection Style | SWIVEL NUT, FLARELESS SECOND END |
| Connection Style | SWIVEL NUT, FLARELESS FIRST END |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| Connection Type | THREADED INTERNAL TUBE SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.490 INCHES NOMINAL IN |
| Operating Pressure | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.562 INCHES SECOND END IN |
| Nominal Thread Size | 0.562 INCHES FIRST END IN |
| Seat Angle | 12.0 DEGREES SECOND END |
| Seat Angle | 12.0 DEGREES FIRST END |
| Specification/standard Data | 81343-AS1339 GOVERNMENT STANDARD |
| Nondefinitive Spec/std Data | 6 SIZE |
| Inside Diameter | 0.313 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Hydrostatic Test Pressure | 6000.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3B SECOND END |
| Thread Class | 3B FIRST END |
| Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | HYDRAULIC SOLUTION RESISTANT |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AS116-06-0086 PRIMARY | Sae International Dba Sae International (USA) |
| AC116-06-0086 | Eaton Aeroquip Llc Dba Jackson North 1 Div Fluid and Electrical Distribution (USA) |
| Reference | Meaning |
|---|---|
| AS116-06-0086 | 3/9 Design control — primary reference U.S. Government activity |
| AS1339 | 5/1 Secondary reference Sae International Dba Sae International |
| 171143-6CR-0086 | 5/9 Secondary reference U.S. Government activity |
| MIL-H-38360 | 5/9 Secondary reference U.S. Government activity |
| SAE-AS1339 | 3/1 Design control — primary reference Sae International Dba Sae International |
| 171143-6CR-0090 | 5/2 Secondary reference U.S. Government activity |
| AS1339 | 5/9 Secondary reference U.S. Government activity |
NSN 4720-01-345-5642 is a Hose Assembly,nonmetallic, manufactured by Sae International Dba Sae International, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-345-5642 has 2 manufacturer part numbers on file: AS116-06-0086 (Sae International Dba Sae International), AC116-06-0086 (Eaton Aeroquip Llc Dba Jackson North 1 Div Fluid and Electrical Distribution).
Key specifications for AS116-06-0086: Flow Angle: 45.0 DEGREES SECOND END; Measuring Method and Length: 8.750 INCHES NOMINAL OVERALL IN; Temp Rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 2.500 INCHES IN. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.