The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-260-9172, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-260-9172 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Status | ACTIVE |
| Measuring Method and Length | 14.000 INCHES NOMINAL WORKING IN |
| Temp Rating | -67.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 4.000 INCHES IN |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.625 INCHES NOMINAL IN |
| Operating Pressure | 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.562 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Specification/standard Data | 88044-AN6270 GOVERNMENT STANDARD |
| Inside Diameter | 0.375 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | AIR SINGLE RESPONSE |
| Hydrostatic Test Pressure | 300.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3B FIRST END |
| Burst Test Pressure | 1000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | ABRASION RESISTANT AND WEATHERPROOF AND FUEL RESISTANT AND OIL RESISTANT AND WATER RESISTANT |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN6270 | 4/1 Identification reference U.S. Government activity |
| 47E521013 ITEM 28 | 5/9 Secondary reference Lockheed Martin Corporation Dba Lockheed Martin Aerostructures |
| 47E521013 | D/9 Drawing number reference only Lockheed Martin Corporation Dba Lockheed Martin Aerostructures |
| 193000-6S-0140 | 5/1 Secondary reference U.S. Government activity |
| AN6270-6S-0140 | 2/2 Government specification standardization U.S. Government activity |
NSN 4720-01-260-9172 is a Hose Assembly,nonmetallic, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
2 possible matches (shared part number, not a government interchangeability claim): 4720-01-260-9173, 4720-01-260-9174. Verify interchangeability with system specifications before substitution.
Key specifications for 4720-01-260-9172: Measuring Method and Length: 14.000 INCHES NOMINAL WORKING IN; Temp Rating: -67.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 4.000 INCHES IN; Connection Style: SWIVEL NUT FLARE FIRST END. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.