The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-218-8017, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 21 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 11 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-218-8017 |
| Primary Part Number | MIL-DTL-83796/1 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Burst Test Pressure | 6000.0 POUNDS PER SQUARE INCH LBS |
| Inside Diameter | 0.219 INCHES NOMINAL IN |
| Layer Composition and Location | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| End Connection Design | STRAIGHT FIRST END |
| Outside Diameter | 0.438 INCHES NOMINAL IN |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| Thread Class | 3B FIRST END |
| Thread Direction | RIGHT-HAND FIRST END |
| Minimum Inside Bending Radius | 2.000 INCHES IN |
| Temp Rating | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Specification/standard Data | MIL-H-83796 GOVERNMENT SPECIFICATION |
| Measuring Method and Length | 17.750 INCHES NOMINAL WORKING IN |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Inside Surface Condition | SMOOTH |
| Nominal Thread Size | 0.438 INCHES FIRST END IN |
| Hydrostatic Test Pressure | 3000.0 POUNDS PER SQUARE INCH LBS |
| Operating Pressure | 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Seat Angle | 37.0 DEGREES FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-DTL-83796/1 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M83796/1E176A00 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-H-83796 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| GH12G | Northrop Grumman Systems Corporation (USA) |
| GH12G0176A | Northrop Grumman Systems Corporation (USA) |
NSN 4720-01-218-8017 is a Hose Assembly,nonmetallic, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-218-8017 has 5 cross-referenced part numbers: MIL-DTL-83796/1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M83796/1E176A00 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-H-83796 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), GH12G (Northrop Grumman Systems Corporation), GH12G0176A (Northrop Grumman Systems Corporation).
There are 11 known substitutes for 4720-01-218-8017: 4720-01-184-4217, 4720-01-200-7938, 4720-01-215-2185 and 8 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-DTL-83796/1: Burst Test Pressure: 6000.0 POUNDS PER SQUARE INCH LBS; Inside Diameter: 0.219 INCHES NOMINAL IN; Layer Composition and Location: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE; End Connection Design: STRAIGHT FIRST END. 21 total characteristics are documented in the Federal Logistics Information System.