The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-207-3670, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Wiggins Lift Co Inc. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 6 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-207-3670 |
| Primary Part Number | 718365 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Wiggins Lift Co Inc |
| Status | ACTIVE |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| Burst Test Pressure | 9000.0 POUNDS PER SQUARE INCH LBS |
| Minimum Inside Bending Radius | 5.000 INCHES IN |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| Temp Rating | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Outside Diameter | 0.688 INCHES NOMINAL IN |
| Inside Diameter | 0.375 INCHES NOMINAL IN |
| Thread Class | 3B FIRST END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Thread Direction | RIGHT-HAND FIRST END |
| Hydrostatic Test Pressure | 4500.0 POUNDS PER SQUARE INCH LBS |
| Operating Pressure | 2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Measuring Method and Length | 100.000 INCHES NOMINAL WORKING IN |
| Inside Surface Condition | SMOOTH |
| Nominal Thread Size | 0.562 INCHES FIRST END IN |
| Thread Series Designator | UNF FIRST END |
| Outer Covering Environmental Protection | ABRASION RESISTANT AND WEATHERPROOF AND OIL RESISTANT |
| Seat Angle | 37.0 DEGREES FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 718365 PRIMARY | Wiggins Lift Co Inc (USA) |
| 10406U-606606-10000 PRIMARY | Danfoss Power Solutions II, Llc (USA) |
| F4210606-6-6-6-100.00 PRIMARY | Parker-Hannifin Corporation Dba Pneutronics Div Hose Products Division (USA) |
| 10406U-606606-10000 | Dana Corp Weatherhead Div (USA) |
| F4210606-6-6-6-100.00 | Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division (USA) |
| FL4029GGG1000 PRIMARY | Danfoss Power Solutions II, Llc (USA) |
NSN 4720-01-207-3670 is a Hose Assembly,nonmetallic, manufactured by Wiggins Lift Co Inc, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-207-3670 has 6 cross-referenced part numbers: 718365 (Wiggins Lift Co Inc), 10406U-606606-10000 (Danfoss Power Solutions II, Llc), F4210606-6-6-6-100.00 (Parker-Hannifin Corporation Dba Pneutronics Div Hose Products Division), 10406U-606606-10000 (Dana Corp Weatherhead Div), F4210606-6-6-6-100.00 (Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division) and 1 more.
There are 2 known substitutes for 4720-01-207-3670: 5310-00-167-0765, 5995-01-440-0694. Verify interchangeability with system specifications before substitution.
Key specifications for 718365: End Connection Design: STRAIGHT FIRST END; Layer Composition and Location: 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE; Burst Test Pressure: 9000.0 POUNDS PER SQUARE INCH LBS; Minimum Inside Bending Radius: 5.000 INCHES IN. 20 total characteristics are documented in the Federal Logistics Information System.