The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-192-8146, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Hydraflow. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 11 commercial cross-references from 8 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-192-8146 |
| Primary Part Number | 89302-33 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Hydraflow |
| Status | ACTIVE |
| Thread Direction | RIGHT-HAND FIRST END |
| Features Provided | REUSABLE END FITTINGS |
| Exterior Color | GREEN |
| Layer Composition and Location | 1ST LAYER BRAIDED COTTON CORD OR 1ST LAYER BRAIDED RAYON CORD AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Outside Diameter | 0.875 INCHES NOMINAL IN |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | STRAIGHT FIRST END |
| Thread Class | 3B FIRST END |
| Burst Test Pressure | 800.0 POUNDS PER SQUARE INCH LBS |
| Inside Diameter | 0.500 INCHES NOMINAL IN |
| Fitting Component and Surface Treatment | COMPLETE FITTING PASSIVATE FIRST END |
| End Fitting Component and Material | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| Temp Rating | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 5.000 INCHES IN |
| Measuring Method and Length | 36.000 INCHES NOMINAL WORKING IN |
| Nominal Thread Size | 0.750 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Inside Surface Condition | SMOOTH |
| Hydrostatic Test Pressure | 400.0 POUNDS PER SQUARE INCH LBS |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| Operating Pressure | 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Cross-Sectional Shape Style | ROUND |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 89302-33 PRIMARY | Hydraflow (USA) |
| 89302-033 | Hydraflow (USA) |
| 2904943 | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA) |
| AE1007372H0360 | Eaton Aeroquip Llc Dba Jackson North 1 Div Fluid and Electrical Distribution (USA) |
| 2904943-33 | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA) |
| 2904943 10001 | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
| 4720PL2089287 | Jednolity Indeks Materialowy - Uniform Material Index (POL) |
| 2904943-33 10001 | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
| 2904943 | Naval Sea Systems Command (USA) |
| 11439271-67 | Us Army Aviation and Missile Command (USA) |
| T153-97672-8-0360 | Hope, Inc. Dba Hope Inc (USA) |
NSN 4720-01-192-8146 is a Hose Assembly,nonmetallic, manufactured by Hydraflow, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-192-8146 has 11 cross-referenced part numbers: 89302-33 (Hydraflow), 89302-033 (Hydraflow), 2904943 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier), AE1007372H0360 (Eaton Aeroquip Llc Dba Jackson North 1 Div Fluid and Electrical Distribution), 2904943-33 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier) and 6 more.
There is 1 known substitute for 4720-01-192-8146: 4720-01-320-3739. Verify interchangeability with system specifications before substitution.
Key specifications for 89302-33: Thread Direction: RIGHT-HAND FIRST END; Features Provided: REUSABLE END FITTINGS; Exterior Color: GREEN; Layer Composition and Location: 1ST LAYER BRAIDED COTTON CORD OR 1ST LAYER BRAIDED RAYON CORD AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE. 23 total characteristics are documented in the Federal Logistics Information System.