The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-151-2594, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Cepeda Associates, Inc. Dba Cepeda Associates Inc. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 4 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-151-2594 |
| Primary Part Number | 1014-H-9 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Cepeda Associates, Inc. Dba Cepeda Associates Inc |
| Status | ACTIVE |
| End Connection Design | STRAIGHT FIRST END |
| Thread Class | 2B FIRST END |
| Inside Diameter | 0.500 INCHES NOMINAL IN |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| Outer Covering Environmental Protection | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| Inside Surface Condition | SMOOTH |
| Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH LBS |
| Seat Angle | 37.0 DEGREES FIRST END |
| Outside Diameter | 0.870 INCHES NOMINAL IN |
| Minimum Inside Bending Radius | 7.000 INCHES IN |
| Measuring Method and Length | 132.000 INCHES NOMINAL OVERALL IN |
| Thread Series Designator | UNF FIRST END |
| Media for Which Designed | AIR AND FUEL/OIL, HYDROCARBON AND WATER SINGLE RESPONSE |
| Thread Direction | RIGHT-HAND FIRST END |
| Operating Pressure | 3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Nominal Thread Size | 0.750 INCHES FIRST END IN |
| Temp Rating | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Cross-Sectional Shape Style | ROUND |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 1014-D103 | Cepeda Associates, Inc. Dba Cepeda Associates Inc (USA) |
| 1014-H-9 PRIMARY | Cepeda Associates, Inc. Dba Cepeda Associates Inc (USA) |
| 3010606C-8-8-8-132W/0503-8-8C/2/ PRIMARY | Parker-Hannifin Corporation Dba Pneutronics Div Hose Products Division (USA) |
| 3010606C-8-8-8-132W/0503-8-8C/2/ | Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division (USA) |
NSN 4720-01-151-2594 is a Hose Assembly,nonmetallic, manufactured by Cepeda Associates, Inc. Dba Cepeda Associates Inc, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-151-2594 has 4 cross-referenced part numbers: 1014-D103 (Cepeda Associates, Inc. Dba Cepeda Associates Inc), 1014-H-9 (Cepeda Associates, Inc. Dba Cepeda Associates Inc), 3010606C-8-8-8-132W/0503-8-8C/2/ (Parker-Hannifin Corporation Dba Pneutronics Div Hose Products Division), 3010606C-8-8-8-132W/0503-8-8C/2/ (Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division).
There are 4 known substitutes for 4720-01-151-2594: 4720-00-678-8732, 4720-01-151-2593, 4720-01-151-3724 and 1 more. Verify interchangeability with system specifications before substitution.
Key specifications for 1014-H-9: End Connection Design: STRAIGHT FIRST END; Thread Class: 2B FIRST END; Inside Diameter: 0.500 INCHES NOMINAL IN; Layer Composition and Location: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC. 21 total characteristics are documented in the Federal Logistics Information System.