The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-075-3484, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-075-3484 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES SECOND END |
| Measuring Method and Length | 34.500 INCHES NOMINAL WORKING IN |
| Minimum Inside Bending Radius | 3.000 INCHES IN |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED COTTON CORD AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| Connection Type | THREADED INTERNAL TUBE SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.500 INCHES MINIMUM AND 0.539 INCHES MAXIMUM IN |
| Operating Pressure | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Inside Diameter | 0.188 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN |
| Burst Test Pressure | 12000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | OIL RESISTANT AND MILDEW RESISTANT |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 69D4992-8 | 3/9 Design control — primary reference U.S. Government activity |
NSN 4720-01-075-3484 is a Hose Assembly,nonmetallic, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
Key specifications for 4720-01-075-3484: Flow Angle: 90.0 DEGREES SECOND END; Measuring Method and Length: 34.500 INCHES NOMINAL WORKING IN; Minimum Inside Bending Radius: 3.000 INCHES IN; End Connection Design: ELBOW SECOND END. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.