The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-052-5985, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-052-5985 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES SECOND END |
| Measuring Method and Length | 20.000 INCHES NOMINAL WORKING IN |
| Temp Rating | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 12.000 INCHES IN |
| Connection Style | RAISED SWIVEL W/ GASKET GROOVE FIRST END |
| Connection Style | RAISED SWIVEL W/ GASKET GROOVE SECOND END |
| Flange Outside Diameter | 2.000 INCHES NOMINAL SECOND END IN |
| Flange Outside Diameter | 1.750 INCHES NOMINAL FIRST END IN |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Connection Type | RAISED FACE FLANGE FIRST END |
| Connection Type | RAISED FACE FLANGE SECOND END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 1.562 INCHES NOMINAL IN |
| Operating Pressure | 2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Inside Diameter | 1.000 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Raised Face Diameter | 2.000 INCHES NOMINAL SECOND END IN |
| Raised Face Diameter | 1.750 INCHES NOMINAL FIRST END IN |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Burst Test Pressure | 8000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | ABRASION RESISTANT AND WEATHERPROOF |
| Flange Style | ROUND W/ OUT BOLT HOLES FIRST END |
| Flange Style | ROUND W/ OUT BOLT HOLES SECOND END |
| End Flange Construction | SOLID SECOND END |
| End Flange Construction | SOLID FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 16C-16SF-20SF90-20 | 5/9 Secondary reference Goodyear Tire and Rubber Co the |
| 16C-16SF-20SF90-20 | 5/9 Secondary reference Anchor Swan Corp Sub of Amerace Corp |
| A101-052-5985 | 5/9 Secondary reference Tri-State Hose & Fitting Inc |
| 16C-16SF-20SF90-20 | 5/9 Secondary reference Contitech Usa, Inc. |
| 16C-16SF-20SF90-20 | 3/9 Design control — primary reference Contitech Usa, Inc Dba Veyance Technologies |
| 16B-BC-16FHSA-20FH9A-20 | 5/9 Secondary reference Dayco Corp National Hose Div |
NSN 4720-01-052-5985 is a Hose Assembly,nonmetallic, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
Key specifications for 4720-01-052-5985: Flow Angle: 90.0 DEGREES SECOND END; Measuring Method and Length: 20.000 INCHES NOMINAL WORKING IN; Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 12.000 INCHES IN. 27 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.