The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-044-0863, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Columbus Jack Corporation Div Columbus Jack. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 11 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-044-0863 |
| Primary Part Number | 8704-26 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Columbus Jack Corporation Div Columbus Jack |
| Status | ACTIVE |
| Measuring Method and Length | 120.000 INCHES NOMINAL OVERALL IN |
| Temp Rating | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Fitting Component and Surface Treatment | COMPLETE FITTING DICHROMATE FIRST END |
| Minimum Inside Bending Radius | 6.000 INCHES IN |
| Connection Style | INVERTED FLARE FIRST END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND 5TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Connection Type | THREADED EXTERNAL PIPE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.937 INCHES NOMINAL IN |
| Operating Pressure | 7500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| End Fitting Component and Material | COMPLETE FITTING STEEL ALL ENDS |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.375 INCHES FIRST END IN |
| Seat Angle | 30.0 DEGREES FIRST END |
| Exterior Color | BLACK |
| Nondefinitive Spec/std Data | 6 SIZE |
| Inside Diameter | 0.512 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Hydrostatic Test Pressure | 15000.0 POUNDS PER SQUARE INCH LBS |
| Burst Test Pressure | 30000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| Thread Series Designator | NPTF FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 8704-26 PRIMARY | Columbus Jack Corporation Div Columbus Jack (USA) |
| 6S4-6MS-120 | Age Logistics Corporation (USA) |
| Reference | Meaning |
|---|---|
| 6S4-6MS-120-J | 5/9 Secondary reference Echelon Supply and Service, Inc. |
| A3417-10 | 5/9 Secondary reference U.S. Government activity |
| FA8346GGG1200 | 5/9 Secondary reference Danfoss Power Solutions II, Llc |
| 8704-26 | 3/9 Design control — primary reference Age Logistics Corporation |
| L42400101-6-6-6-120 | 5/9 Secondary reference U.S. Government activity |
| 42400101-6-6-6-120.00 | 5/9 Secondary reference U.S. Government activity |
| 248C6-PM6PM6-120 | 5/9 Secondary reference U.S. Government activity |
| FA8346GGG1200 | 5/9 Secondary reference Eaton Aeroquip Llc Dba Jackson North 1 Div Fluid and Electrical Distribution |
| N7EK06-06MBX06MB120IN | 5/9 Secondary reference Parker Hannifin Corp Hose Products Div |
| 6S4-6MS-120 | 5/9 Secondary reference U.S. Government activity |
| 4240C6-PM6PM6-120 | 5/9 Secondary reference U.S. Government activity |
NSN 4720-01-044-0863 is a Hose Assembly,nonmetallic, manufactured by Columbus Jack Corporation Div Columbus Jack, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-044-0863 has 2 manufacturer part numbers on file: 8704-26 (Columbus Jack Corporation Div Columbus Jack), 6S4-6MS-120 (Age Logistics Corporation).
Key specifications for 8704-26: Measuring Method and Length: 120.000 INCHES NOMINAL OVERALL IN; Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Fitting Component and Surface Treatment: COMPLETE FITTING DICHROMATE FIRST END; Minimum Inside Bending Radius: 6.000 INCHES IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.