The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-035-5000, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 6 commercial cross-references from 4 manufacturers, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-035-5000 |
| Primary Part Number | 11681077 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Connection Type | THREADED EXTERNAL PIPE SECOND END |
| Outside Diameter | 0.516 INCHES NOMINAL IN |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Seat Angle | 30.0 DEGREES SECOND END |
| Operating Pressure | 500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | STRAIGHT SECOND END |
| Burst Test Pressure | 2000.0 POUNDS PER SQUARE INCH LBS |
| Thread Direction | RIGHT-HAND SECOND END |
| Nominal Thread Size | 0.125 INCHES SECOND END IN |
| Thread Series Designator | UNF FIRST END |
| End Connection Design | STRAIGHT FIRST END |
| Inside Diameter | 0.188 INCHES NOMINAL IN |
| Thread Class | 3B FIRST END |
| Hydrostatic Test Pressure | 1000.0 POUNDS PER SQUARE INCH LBS |
| Layer Composition and Location | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| Measuring Method and Length | 11.875 INCHES NOMINAL OVERALL IN |
| Minimum Inside Bending Radius | 1.500 INCHES IN |
| Outer Covering Environmental Protection | COLD RESISTANT AND OIL RESISTANT |
| Temp Rating | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Inside Surface Condition | SMOOTH |
| Features Provided | REUSABLE END FITTINGS |
| Connection Style | INVERTED FLARE SECOND END |
| Nominal Thread Size | 0.438 INCHES FIRST END IN |
| Vacuum in Torr | 50.8 |
| Thread Series Designator | NPTF SECOND END |
| Media for Which Designed | AIR AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Seat Angle | 37.0 DEGREES FIRST END |
| Thread Direction | RIGHT-HAND FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 103462 | Mil-Tech Mfg Inc (USA) |
| FC184-4-4-4-412-2-4S-411-4S-0117 | Danfoss Power Solutions II, Llc (USA) |
| 4R8612 | Caterpillar Inc Div Caterpillar Defense (USA) |
| 11681077 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| FA5691EEE0117 PRIMARY | Danfoss Power Solutions II, Llc (USA) |
| 9L5098 | Caterpillar Inc Div Caterpillar Defense (USA) |
NSN 4720-01-035-5000 is a Hose Assembly,nonmetallic, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-035-5000 has 6 cross-referenced part numbers: 103462 (Mil-Tech Mfg Inc), FC184-4-4-4-412-2-4S-411-4S-0117 (Danfoss Power Solutions II, Llc), 4R8612 (Caterpillar Inc Div Caterpillar Defense), 11681077 (U S Army Tank Automotive Command Amsta-Im-Mm), FA5691EEE0117 (Danfoss Power Solutions II, Llc) and 1 more.
There are 6 known substitutes for 4720-01-035-5000: 5315-00-010-3462, 5315-00-616-5529, 6105-01-067-6704 and 3 more. Verify interchangeability with system specifications before substitution.
Key specifications for 11681077: Connection Type: THREADED EXTERNAL PIPE SECOND END; Outside Diameter: 0.516 INCHES NOMINAL IN; Connection Type: THREADED INTERNAL TUBE FIRST END; Seat Angle: 30.0 DEGREES SECOND END. 30 total characteristics are documented in the Federal Logistics Information System.