The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-033-2096, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Morris Material Handling, Inc.. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-033-2096 |
| Primary Part Number | 44Q277D1 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Morris Material Handling, Inc. |
| Status | ACTIVE |
| Thread Class | 2B SECOND END |
| Seat Angle | 37.0 DEGREES SECOND END |
| Connection Style | SWIVEL NUT FLARE SECOND END |
| Operating Pressure | 3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH LBS |
| End Connection Design | ELBOW FIRST END |
| End Connection Design | ELBOW SECOND END |
| Seat Angle | 45.0 DEGREES FIRST END |
| Temp Rating | -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Flow Angle | 45.0 DEGREES FIRST END |
| Hydrostatic Test Pressure | 7000.0 POUNDS PER SQUARE INCH LBS |
| Flow Angle | 90.0 DEGREES SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Inside Diameter | 0.500 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Angle Between Rigid Elbow Fittings in Deg | 0.0 |
| Outer Covering Environmental Protection | OIL RESISTANT AND OZONE RESISTANT |
| Nominal Thread Size | 0.750 INCHES FIRST END IN |
| Measuring Method and Length | 16.000 INCHES NOMINAL OVERALL IN |
| Thread Class | 2B FIRST END |
| Thread Series Designator | UNF FIRST END |
| Media for Which Designed | HYDRAULIC FLUID AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| Thread Direction | RIGHT-HAND SECOND END |
| Nominal Thread Size | 0.750 INCHES SECOND END IN |
| Thread Series Designator | UNF SECOND END |
| Minimum Inside Bending Radius | 7.000 INCHES IN |
| Cross-Sectional Shape Style | ROUND |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 13218E9243 | Cecom Lr Center (USA) |
| 44Q277D1 PRIMARY | Morris Material Handling, Inc. (USA) |
| 13218E9243-27 | Cecom Lr Center (USA) |
NSN 4720-01-033-2096 is a Hose Assembly,nonmetallic, manufactured by Morris Material Handling, Inc., classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-033-2096 has 3 cross-referenced part numbers: 13218E9243 (Cecom Lr Center), 44Q277D1 (Morris Material Handling, Inc.), 13218E9243-27 (Cecom Lr Center).
There are 2 known substitutes for 4720-01-033-2096: 4720-00-460-6134, 4720-01-028-5548. Verify interchangeability with system specifications before substitution.
Key specifications for 44Q277D1: Thread Class: 2B SECOND END; Seat Angle: 37.0 DEGREES SECOND END; Connection Style: SWIVEL NUT FLARE SECOND END; Operating Pressure: 3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS. 30 total characteristics are documented in the Federal Logistics Information System.