The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-913-9740, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Danfoss Power Solutions II, Llc. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 10 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-00-913-9740 |
| Primary Part Number | 02506N106608-05500 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Danfoss Power Solutions II, Llc |
| Status | ACTIVE |
| Measuring Method and Length | 55.000 INCHES NOMINAL OVERALL IN |
| Temp Rating | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 4.000 INCHES IN |
| Connection Style | PLAIN SECOND END |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | STRAIGHT FIRST END |
| End Connection Design | STRAIGHT SECOND END |
| Layer Composition and Location | 1ST LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND 2ND LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Connection Type | THREADED EXTERNAL PIPE SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.672 INCHES NOMINAL IN |
| Operating Pressure | 2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.375 INCHES SECOND END IN |
| Nominal Thread Size | 0.750 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Exterior Color | BLACK |
| Inside Diameter | 0.312 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | AIR AND ETHYLENE GLYCOL AND FUEL/OIL, HYDROCARBON AND WATER SINGLE RESPONSE |
| Hydrostatic Test Pressure | 4500.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2B FIRST END |
| Burst Test Pressure | 9000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | OIL RESISTANT AND WEATHERPROOF |
| Thread Series Designator | NPT SECOND END |
| Thread Series Designator | UNF FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 02506N106608-05500 PRIMARY | Danfoss Power Solutions II, Llc (USA) |
| Reference | Meaning |
|---|---|
| 02506N106608-05500 | 5/9 Secondary reference Dana Corp Weatherhead Div |
| 6C6MSR8FJSR55.00 | 5/9 Secondary reference Contitech Usa, Inc. |
| 482825 | 5/9 Secondary reference American Hoist and Derrick Co |
| 2010106-6-6-6-55.00 | 5/9 Secondary reference U.S. Government activity |
| 2010106-6-6-6-55.00 | 5/2 Secondary reference U.S. Government activity |
| H1BK06-06MNC08NJ55 | 5/9 Secondary reference Parker Hannifin Corp Hose Products Div |
| 6C6MSR8FJSR55.00 | 5/9 Secondary reference Goodyear Tire and Rubber Co the |
| 6C6MSR8FJSR55.00 | 5/9 Secondary reference Anchor Swan Corp Sub of Amerace Corp |
| 211R6JSN8PMN6-55 | 5/9 Secondary reference U.S. Government activity |
| 482825 | 5/9 Secondary reference Terex American Crane Corp |
NSN 4720-00-913-9740 is a Hose Assembly,nonmetallic, manufactured by Danfoss Power Solutions II, Llc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-00-913-9740 has 1 manufacturer part number on file: 02506N106608-05500 (Danfoss Power Solutions II, Llc).
Key specifications for 02506N106608-05500: Measuring Method and Length: 55.000 INCHES NOMINAL OVERALL IN; Temp Rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 4.000 INCHES IN; Connection Style: PLAIN SECOND END. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.