The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-913-8671, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Terex American Crane Corp. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-00-913-8671 |
| Primary Part Number | 482902 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Terex American Crane Corp |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES FIRST END |
| Measuring Method and Length | 47.500 INCHES MINIMUM WORKING AND 48.500 INCHES MAXIMUM WORKING IN |
| Temp Rating | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 9.500 INCHES IN |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | ELBOW FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| Angle Between Rigid Elbow Fittings in Deg | 270.0 |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN |
| Operating Pressure | 2225.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.750 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Inside Diameter | 0.500 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Hydrostatic Test Pressure | 4500.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3B FIRST END |
| Burst Test Pressure | 9000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | OIL RESISTANT AND WEATHERPROOF |
| Thread Series Designator | UNF FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 482902 PRIMARY | Terex American Crane Corp (USA) |
| Reference | Meaning |
|---|---|
| 482902 | 5/9 Secondary reference American Hoist and Derrick Co |
NSN 4720-00-913-8671 is a Hose Assembly,nonmetallic, manufactured by Terex American Crane Corp, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-00-913-8671 has 1 manufacturer part number on file: 482902 (Terex American Crane Corp).
Key specifications for 482902: Flow Angle: 90.0 DEGREES FIRST END; Measuring Method and Length: 47.500 INCHES MINIMUM WORKING AND 48.500 INCHES MAXIMUM WORKING IN; Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 9.500 INCHES IN. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.