The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-913-3934, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Terex American Crane Corp. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-00-913-3934 |
| Primary Part Number | 482911 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Terex American Crane Corp |
| Status | ACTIVE |
| Flow Angle | 45.0 DEGREES SECOND END |
| Measuring Method and Length | 24.005 INCHES NOMINAL WORKING IN |
| Temp Rating | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Flange Thickness | 0.056 INCHES NOMINAL SECOND END IN |
| Minimum Inside Bending Radius | 9.500 INCHES IN |
| Connection Style | RAISED SWIVEL W/ GASKET GROOVE SECOND END |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Connection Type | RAISED FACE FLANGE SECOND END |
| Bolt Hole Diameter | 0.041 INCHES NOMINAL SECOND END IN |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM IN |
| Operating Pressure | 2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Features Provided | ELECTROSTATIC DISCHARGE CAPABILITY |
| Flange Length | 2.056 INCHES NOMINAL SECOND END IN |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.875 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Inside Diameter | 0.750 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Bolt Hole Quantity | 4 SECOND END |
| Center to Center Distance Between Bolt Holes Along Length | 1.875 INCHES NOMINAL SECOND END IN |
| Raised Face Diameter | 1.500 INCHES NOMINAL SECOND END IN |
| Center to Center Distance Between Bolt Holes Along Width | 0.088 INCHES NOMINAL SECOND END IN |
| Flange Width | 2.007 INCHES NOMINAL SECOND END IN |
| Hydrostatic Test Pressure | 4500.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2B FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 482911 PRIMARY | Terex American Crane Corp (USA) |
| Reference | Meaning |
|---|---|
| 482911 | 5/9 Secondary reference American Hoist and Derrick Co |
NSN 4720-00-913-3934 is a Hose Assembly,nonmetallic, manufactured by Terex American Crane Corp, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-00-913-3934 has 1 manufacturer part number on file: 482911 (Terex American Crane Corp).
Key specifications for 482911: Flow Angle: 45.0 DEGREES SECOND END; Measuring Method and Length: 24.005 INCHES NOMINAL WORKING IN; Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Flange Thickness: 0.056 INCHES NOMINAL SECOND END IN. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.