The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-913-1193, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Dana Off Highway Products, Llc. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-00-913-1193 |
| Primary Part Number | 561643 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Dana Off Highway Products, Llc |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES SECOND END |
| Measuring Method and Length | 87.000 INCHES NOMINAL OVERALL IN |
| Temp Rating | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 9.500 INCHES IN |
| Connection Style | SWIVEL NUT FLARE SECOND END |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | ELBOW SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| Connection Type | THREADED INTERNAL TUBE SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 1.250 INCHES NOMINAL IN |
| Operating Pressure | 2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 1.062 INCHES FIRST END IN |
| Nominal Thread Size | 1.062 INCHES SECOND END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Seat Angle | 37.0 DEGREES SECOND END |
| Specification/standard Data | 81349-MIL-H-13531 GOVERNMENT SPECIFICATION |
| Nondefinitive Spec/std Data | 2 TYPE AND A CLASS |
| Inside Diameter | 0.750 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Hydrostatic Test Pressure | 4500.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2B FIRST END |
| Thread Class | 2B SECOND END |
| Burst Test Pressure | 9000.0 POUNDS PER SQUARE INCH LBS |
| Thread Quantity Per Inch | 12 SECOND END |
| Thread Quantity Per Inch | 12 FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 120RA12FJSR12INSLR90DES83SP135 | Goodyear Tire and Rubber Co the (USA) |
| 561643 PRIMARY | Dana Off Highway Products, Llc (USA) |
| Reference | Meaning |
|---|---|
| 120RA12FJSR12INSLR90DES83SP135 | 5/9 Secondary reference Anchor Swan Corp Sub of Amerace Corp |
| 120RA12FJSR12INSLR90DES83SP135 | 5/9 Secondary reference Contitech Usa, Inc. |
| MIL-H-13531 | 4/1 Identification reference U.S. Government activity |
| 561643 | 3/9 Design control — primary reference Vme Americas Inc Sub of Vme Group N V |
NSN 4720-00-913-1193 is a Hose Assembly,nonmetallic, manufactured by Dana Off Highway Products, Llc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-00-913-1193 has 2 manufacturer part numbers on file: 120RA12FJSR12INSLR90DES83SP135 (Goodyear Tire and Rubber Co the), 561643 (Dana Off Highway Products, Llc).
1 possible match (shared part number, not a government interchangeability claim): 4720-01-615-0355. Verify interchangeability with system specifications before substitution.
Key specifications for 561643: Flow Angle: 90.0 DEGREES SECOND END; Measuring Method and Length: 87.000 INCHES NOMINAL OVERALL IN; Temp Rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 9.500 INCHES IN. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.