The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-890-6243, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Itw Industrial Finishing Dba Binks Devilbiss. Government technical data includes 22 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 4 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 4720-00-890-6243 |
| Primary Part Number | 71-1206 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Itw Industrial Finishing Dba Binks Devilbiss |
| Status | CANCELLED |
| Outside Diameter | 0.625 INCHES NOMINAL IN |
| Temp Rating | -40.0 FAHRENHEIT AND 180.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| End Connection Design | STRAIGHT FIRST END |
| Minimum Inside Bending Radius | 3.000 INCHES IN |
| Burst Test Pressure | 1000.0 POUNDS PER SQUARE INCH LBS |
| Nominal Thread Size | 0.250 INCHES FIRST END IN |
| Outer Covering Environmental Protection | ABRASION RESISTANT AND ACID RESISTANT AND ALCOHOL RESISTANT AND ALKALI RESISTANT AND COLD RESISTANT AND WATER RESISTANT AND SALT WATER RESISTANT |
| Thread Series Designator | NPSM FIRST END |
| Measuring Method and Length | 600.000 INCHES NOMINAL EXCLUDING END FITTINGS IN |
| Layer Composition and Location | 1ST LAYER BRAIDED RAYON CORD AND OUTER LAYER SHEET RUBBER |
| Media for Which Designed | AIR SINGLE RESPONSE |
| Connection Style | SWIVEL NUT, INVERTED FLARE FIRST END |
| Operating Pressure | 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Inside Surface Condition | SMOOTH |
| Thread Quantity Per Inch | 18 FIRST END |
| Thread Direction | RIGHT-HAND FIRST END |
| Seat Angle | 30.0 DEGREES FIRST END |
| Hydrostatic Test Pressure | 500.0 POUNDS PER SQUARE INCH LBS |
| Cross-Sectional Shape Style | ROUND |
| Connection Type | THREADED INTERNAL PIPE FIRST END |
| Inside Diameter | 0.313 INCHES NOMINAL IN |
| Exterior Color | RED |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| C1M-71-1206 | Echelon Supply and Service, Inc. (USA) |
| 71-1206 PRIMARY | Itw Industrial Finishing Dba Binks Devilbiss (USA) |
| 71-1706 | Itw Industrial Finishing Dba Binks Devilbiss (USA) |
NSN 4720-00-890-6243 is a Hose Assembly,nonmetallic, manufactured by Itw Industrial Finishing Dba Binks Devilbiss, classified under FSC 4720 (No Item Name Available). Status: cancelled.
NSN 4720-00-890-6243 has 3 cross-referenced part numbers: C1M-71-1206 (Echelon Supply and Service, Inc.), 71-1206 (Itw Industrial Finishing Dba Binks Devilbiss), 71-1706 (Itw Industrial Finishing Dba Binks Devilbiss).
There are 4 known substitutes for 4720-00-890-6243: 1650-00-108-9230, 4720-00-233-9447, 5120-00-243-7325 and 1 more. Verify interchangeability with system specifications before substitution.
Key specifications for 71-1206: Outside Diameter: 0.625 INCHES NOMINAL IN; Temp Rating: -40.0 FAHRENHEIT AND 180.0 FAHRENHEIT SINGLE RESPONSE DEGF; End Connection Design: STRAIGHT FIRST END; Minimum Inside Bending Radius: 3.000 INCHES IN. 22 total characteristics are documented in the Federal Logistics Information System.
NSN 4720-00-890-6243 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.