PartsTable TECHNICAL DATA SHEET
NSN 4720-00-849-8549Government record, cited

Hose Assembly, Nonmetallic4720-00-849-8549

NSN 4720-00-849-8549 · NIIN 008498549 · Part number 147-51101-01
Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company · FSC 4720 — Hose and Flexible Tubing · FSG 47 — Pipe, Tubing, Hose, and Fittings · CAGE 14798
Government record, cited
NSN 4720-00-849-8549 — this item is cataloged by the U.S. Government under National Stock Number 4720-00-849-8549. Manufacturer of record part number: 147-51101-01.
Also searched as  4720-00-849-8549 · 4720008498549 · NIIN 008498549 · 00-849-8549 · FSC 4720 Hose and Flexible Tubing · CAGE 14798 · 147-51101-01 · 147-51101-1 · 10-20051-550
Nearby stock numbers  ·
Features
  • Hose Assembly,nonmetallic — FSC 4720
  • Measuring Method and Length: 22.500 INCHES NOMINAL OVERALL IN
  • Temp Rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF
  • Flange Thickness: 0.363 INCHES MINIMUM AND 0.395 INCHES MAXIMUM FIRST END IN
  • Minimum Inside Bending Radius: 11.000 INCHES IN
  • Connection Style: RAISED SWIVEL FIRST END
  • End Connection Design: STRAIGHT FIRST END
  • Layer Composition and Location: 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD
Identification
  • NSN: 4720-00-849-8549
  • NIIN: 008498549
  • FSC: 4720 — Hose and Flexible Tubing
  • FSG: 47 — Pipe, Tubing, Hose, and Fittings
  • Primary part number: 147-51101-01
  • Manufacturer: Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company
General Description

The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-849-8549, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN4720-00-849-8549
Primary Part Number147-51101-01
Item NameHose Assembly,nonmetallic
FSC / FSG4720 / 47 — Hose and Flexible Tubing
ManufacturerDesigned Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company
StatusACTIVE
Measuring Method and Length22.500 INCHES NOMINAL OVERALL IN
Temp Rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF
Flange Thickness0.363 INCHES MINIMUM AND 0.395 INCHES MAXIMUM FIRST END IN
Minimum Inside Bending Radius11.000 INCHES IN
Connection StyleRAISED SWIVEL FIRST END
End Connection DesignSTRAIGHT FIRST END
Layer Composition and Location1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD
Connection TypeRAISED FACE FLANGE FIRST END
Bolt Hole Diameter0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM FIRST END IN
Cross-Sectional Shape StyleROUND
Outside Diameter1.695 INCHES NOMINAL IN
Operating Pressure120.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
Features ProvidedELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS
Flange Length2.375 INCHES NOMINAL FIRST END IN
Inside Diameter1.375 INCHES NOMINAL IN
Inside Surface ConditionSMOOTH
Bolt Hole Quantity4 FIRST END
Center to Center Distance Between Bolt Holes Along Length1.812 INCHES NOMINAL FIRST END IN
Raised Face Diameter2.125 INCHES NOMINAL FIRST END IN
Raised Face Height0.020 INCHES NOMINAL FIRST END IN
Center to Center Distance Between Bolt Holes Along Width1.812 INCHES NOMINAL FIRST END IN
Flange Width2.375 INCHES NOMINAL FIRST END IN
Hydrostatic Test Pressure240.0 POUNDS PER SQUARE INCH LBS
Burst Test Pressure720.0 POUNDS PER SQUARE INCH LBS
Outer Covering Environmental ProtectionFUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT
Flange StyleRECTANGULAR (INCLUDES SQUARE) FIRST END
End Flange ConstructionSOLID FIRST END
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeF
Cross-Reference Index
Part NumberManufacturer
147-51101-01 PRIMARY Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company (USA)
Reference documents
ReferenceMeaning
147-51101-1 5/9 Secondary reference
Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company
10-20051-550 1/2 Source control — Government-approved source
U.S. Government activity
No interchangeability data on file.
Other items in FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4720-00-000-0080
HOSE ASSEMBLY,NONMETALLIC
4720-00-000-0081
4720-00-000-0081 · Item name not on file
4720-00-000-0084
HOSE,PREFORMED
4720-00-000-0724
4720-00-000-0724 · Item name not on file
4720-00-001-0014
HOSE ASSEMBLY,NONMETALLIC
4720-00-001-0015
4720-00-001-0015 · Item name not on file
4720-00-001-0023
HOSE ASSEMBLY,NONMETALLIC
4720-00-001-0025
4720-00-001-0025 · Item name not on file

Frequently Asked Questions

What is NSN 4720-00-849-8549?

NSN 4720-00-849-8549 is a Hose Assembly,nonmetallic, manufactured by Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company, classified under FSC 4720, Hose and Flexible Tubing. Status: active.

What part numbers are listed for NSN 4720-00-849-8549?

NSN 4720-00-849-8549 has 1 manufacturer part number on file: 147-51101-01 (Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company).

What are the specifications of 147-51101-01?

Key specifications for 147-51101-01: Measuring Method and Length: 22.500 INCHES NOMINAL OVERALL IN; Temp Rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF; Flange Thickness: 0.363 INCHES MINIMUM AND 0.395 INCHES MAXIMUM FIRST END IN; Minimum Inside Bending Radius: 11.000 INCHES IN. 27 specifications are documented in the U.S. Government catalog.

Is NSN 4720-00-849-8549 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com