PartsTable TECHNICAL DATA SHEET
NSN 4720-00-790-1620Government record, cited

Hose Assembly, Nonmetallic4720-00-790-1620

NSN 4720-00-790-1620 · NIIN 007901620
FSC 4720 — Hose and Flexible Tubing · FSG 47 — Pipe, Tubing, Hose, and Fittings
Government record, cited
Also searched as  4720-00-790-1620 · 4720007901620 · NIIN 007901620 · 00-790-1620 · FSC 4720 Hose and Flexible Tubing · 32SL4-32FC2-32FC2-90-31IN · 561795 · M52471/3C4030310 · MIL-H-52471 · 561795
Nearby stock numbers  ·
Features
  • Hose Assembly,nonmetallic — FSC 4720
  • Flow Angle: 90.0 DEGREES SECOND END
  • Measuring Method and Length: 31.000 INCHES NOMINAL WORKING IN
  • Temp Rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
  • Fitting Component and Surface Treatment: COMPLETE FITTING CADMIUM FIRST END
  • Flange Thickness: 0.370 INCHES NOMINAL SECOND END IN
  • Flange Thickness: 0.370 INCHES NOMINAL FIRST END IN
  • Minimum Inside Bending Radius: 7.000 INCHES IN
Identification
  • NSN: 4720-00-790-1620
  • NIIN: 007901620
  • FSC: 4720 — Hose and Flexible Tubing
  • FSG: 47 — Pipe, Tubing, Hose, and Fittings
General Description

The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-790-1620, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 9 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN4720-00-790-1620
Item NameHose Assembly,nonmetallic
FSC / FSG4720 / 47 — Hose and Flexible Tubing
StatusACTIVE
Flow Angle90.0 DEGREES SECOND END
Measuring Method and Length31.000 INCHES NOMINAL WORKING IN
Temp Rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
Fitting Component and Surface TreatmentCOMPLETE FITTING CADMIUM FIRST END
Flange Thickness0.370 INCHES NOMINAL SECOND END IN
Flange Thickness0.370 INCHES NOMINAL FIRST END IN
Minimum Inside Bending Radius7.000 INCHES IN
Connection StylePLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) SECOND END
Connection StylePLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) FIRST END
Flange Outside Diameter2.812 INCHES NOMINAL SECOND END IN
Flange Outside Diameter2.812 INCHES NOMINAL FIRST END IN
End Connection DesignELBOW SECOND END
End Connection DesignSTRAIGHT FIRST END
Layer Composition and Location1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND 5TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER
Connection TypePLAIN FACE FLANGE FIRST END
Connection TypePLAIN FACE FLANGE SECOND END
Cross-Sectional Shape StyleROUND
Outside Diameter2.781 INCHES NOMINAL IN
Operating Pressure2500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
Features ProvidedELECTROSTATIC DISCHARGE CAPABILITY
End Fitting Component and MaterialCOMPLETE FITTING STEEL ALL ENDS
Specification/standard Data81349-MIL-H-52471 GOVERNMENT SPECIFICATION
Nondefinitive Spec/std DataC TYPE
Inside Diameter1.750 INCHES NOMINAL IN
Inside Surface ConditionSMOOTH
Hydrostatic Test Pressure5000.0 POUNDS PER SQUARE INCH LBS
Burst Test Pressure10000.0 POUNDS PER SQUARE INCH LBS
Outer Covering Environmental ProtectionABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
Flange StyleROUND W/ OUT BOLT HOLES FIRST END
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5305-00-988-5342561795 POSSIBLE MATCH
SETSCREW
Possible match (shared part number)Hamilton Sundstrand Corporation Dba Collins Aerospace
5330-01-516-3841561795 POSSIBLE MATCH
SEAL,PLAIN ENCASED
Possible match (shared part number)Skf Usa Inc. Dba Skf Aerospace Sealing Solutions
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
32SL4-32FC2-32FC2-90-31IN 5/9 Secondary reference
Goodyear Tire and Rubber Co the
561795 5/9 Secondary reference
Clark Equipment Co
M52471/3C4030310 2/2 Government specification standardization
U.S. Government activity
MIL-H-52471 4/1 Identification reference
U.S. Government activity
561795 5/9 Secondary reference
Vme Americas Inc Sub of Vme Group N V
MS39318E3D1A000 5/9 Secondary reference
U.S. Government activity
561795 5/1 Secondary reference
Dana Off Highway Products, Llc
32SL4-32FC2-32FC2-90-31IN 5/9 Secondary reference
Contitech Usa, Inc.
32SL4-32FC2-32FC2-90-31IN 5/9 Secondary reference
Anchor Swan Corp Sub of Amerace Corp
Related Parts
5305-00-988-5342POSSIBLE MATCH
SETSCREW
561795
5330-01-516-3841POSSIBLE MATCH
SEAL,PLAIN ENCASED
561795

Frequently Asked Questions

What is NSN 4720-00-790-1620?

NSN 4720-00-790-1620 is a Hose Assembly,nonmetallic, classified under FSC 4720, Hose and Flexible Tubing. Status: active.

What NSN replaces 4720-00-790-1620?

2 possible matches (shared part number, not a government interchangeability claim): 5305-00-988-5342, 5330-01-516-3841. Verify interchangeability with system specifications before substitution.

What are the specifications of 4720-00-790-1620?

Key specifications for 4720-00-790-1620: Flow Angle: 90.0 DEGREES SECOND END; Measuring Method and Length: 31.000 INCHES NOMINAL WORKING IN; Temp Rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF; Fitting Component and Surface Treatment: COMPLETE FITTING CADMIUM FIRST END. 29 specifications are documented in the U.S. Government catalog.

Is NSN 4720-00-790-1620 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com