The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-595-4015, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-00-595-4015 |
| Primary Part Number | AN6260-6-26 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | ACTIVE |
| Vacuum in Torr | 50.8 |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Measuring Method and Length | 26.000 INCHES NOMINAL WORKING IN |
| End Connection Design | STRAIGHT FIRST END |
| Specification/standard Data | 88044-AN6260-6-26 GOVERNMENT STANDARD |
| Operating Pressure | 2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Inside Surface Condition | SMOOTH |
| Hydrostatic Test Pressure | 4500.0 POUNDS PER SQUARE INCH LBS |
| Inside Diameter | 0.312 INCHES NOMINAL IN |
| Thread Class | 3B FIRST END |
| Outer Covering Environmental Protection | HYDRAULIC SOLUTION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND WATERPROOF |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| Minimum Inside Bending Radius | 4.000 INCHES IN |
| Temp Rating | -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Thread Direction | RIGHT-HAND FIRST END |
| Outside Diameter | 0.375 INCHES NOMINAL IN |
| Cross-Sectional Shape Style | ROUND |
| Burst Test Pressure | 9000.0 POUNDS PER SQUARE INCH LBS |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Layer Composition and Location | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| Nominal Thread Size | 0.562 INCHES FIRST END IN |
| Thread Series Designator | UNF FIRST END |
| Seat Angle | 37.0 DEGREES FIRST END |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN6260-6-26 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
NSN 4720-00-595-4015 is a Hose Assembly,nonmetallic, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-00-595-4015 has 1 cross-referenced part number: AN6260-6-26 (Aeronautical Standards Group Dept of Navy and Air Force).
There is 1 known substitute for 4720-00-595-4015: 4720-00-289-4477. Verify interchangeability with system specifications before substitution.
Key specifications for AN6260-6-26: Vacuum in Torr: 50.8; Media for Which Designed: FUEL/OIL, HYDROCARBON SINGLE RESPONSE; Measuring Method and Length: 26.000 INCHES NOMINAL WORKING IN; End Connection Design: STRAIGHT FIRST END. 23 total characteristics are documented in the Federal Logistics Information System.