The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-504-1452, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-00-504-1452 |
| Primary Part Number | 11643567-1 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES FIRST END |
| Measuring Method and Length | 15.750 INCHES NOMINAL WORKING IN |
| Temp Rating | -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Fitting Component and Surface Treatment | COMPLETE FITTING CADMIUM FIRST END |
| Minimum Inside Bending Radius | 16.500 INCHES IN |
| Connection Style | PLAIN SWIVEL W/ GASKET GROOVE FIRST END |
| Flange Outside Diameter | 2.000 INCHES NOMINAL FIRST END IN |
| End Connection Design | ELBOW FIRST END |
| Layer Composition and Location | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Angle Between Rigid Elbow Fittings in Deg | 26.0 |
| Connection Type | PLAIN FACE FLANGE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 1.850 INCHES NOMINAL IN |
| Operating Pressure | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| End Fitting Component and Material | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| Seat Angle | 37.0 DEGREES FIRST END |
| Inside Diameter | 1.250 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Hydrostatic Test Pressure | 6000.0 POUNDS PER SQUARE INCH LBS |
| Burst Test Pressure | 12000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | OIL RESISTANT |
| Flange Style | ROUND W/ OUT BOLT HOLES FIRST END |
| End Flange Construction | SPLIT FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 11643567-1 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| Reference | Meaning |
|---|---|
| 3230663 | 3/2 Design control — primary reference U.S. Government activity |
NSN 4720-00-504-1452 is a Hose Assembly,nonmetallic, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-00-504-1452 has 1 manufacturer part number on file: 11643567-1 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 11643567-1: Flow Angle: 90.0 DEGREES FIRST END; Measuring Method and Length: 15.750 INCHES NOMINAL WORKING IN; Temp Rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Fitting Component and Surface Treatment: COMPLETE FITTING CADMIUM FIRST END. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.