PartsTable TECHNICAL DATA SHEET
NSN 4720-00-464-4216Government record, cited

Hose Assembly, Nonmetallic4720-00-464-4216

NSN 4720-00-464-4216 · NIIN 004644216 · Part number FB8631-04
Danfoss Power Solutions II, Llc · FSC 4720 — Hose and Flexible Tubing · FSG 47 — Pipe, Tubing, Hose, and Fittings · CAGE 01276
Government record, cited
NSN 4720-00-464-4216 — this item is cataloged by the U.S. Government under National Stock Number 4720-00-464-4216. Manufacturer of record part number: FB8631-04.
Also searched as  4720-00-464-4216 · 4720004644216 · NIIN 004644216 · 00-464-4216 · FSC 4720 Hose and Flexible Tubing · CAGE 01276 · FB8631-04 · 13211E3280 · 13211E3280-4 · FB8631-06
Nearby stock numbers  ·
Features
  • Hose Assembly,nonmetallic — FSC 4720
  • Measuring Method and Length: 54.000 INCHES NOMINAL OVERALL IN
  • Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
  • Fitting Component and Surface Treatment: COMPLETE FITTING CADMIUM AND COMPLETE FITTING ZINC FIRST END
  • Minimum Inside Bending Radius: 12.000 INCHES IN
  • Connection Style: SWIVEL NUT FLARE FIRST END
  • End Connection Design: STRAIGHT FIRST END
  • Layer Composition and Location: OUTER LAYER SPIRALLY WRAPPED RUBBER FABRIC
Identification
  • NSN: 4720-00-464-4216
  • NIIN: 004644216
  • FSC: 4720 — Hose and Flexible Tubing
  • FSG: 47 — Pipe, Tubing, Hose, and Fittings
  • Primary part number: FB8631-04
  • Manufacturer: Danfoss Power Solutions II, Llc
General Description

The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-464-4216, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Danfoss Power Solutions II, Llc. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN4720-00-464-4216
Primary Part NumberFB8631-04
Item NameHose Assembly,nonmetallic
FSC / FSG4720 / 47 — Hose and Flexible Tubing
ManufacturerDanfoss Power Solutions II, Llc
StatusACTIVE
Measuring Method and Length54.000 INCHES NOMINAL OVERALL IN
Temp Rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
Fitting Component and Surface TreatmentCOMPLETE FITTING CADMIUM AND COMPLETE FITTING ZINC FIRST END
Minimum Inside Bending Radius12.000 INCHES IN
Connection StyleSWIVEL NUT FLARE FIRST END
End Connection DesignSTRAIGHT FIRST END
Layer Composition and LocationOUTER LAYER SPIRALLY WRAPPED RUBBER FABRIC
Connection TypeTHREADED INTERNAL TUBE FIRST END
Cross-Sectional Shape StyleROUND
Outside Diameter1.547 INCHES NOMINAL IN
Operating Pressure3800.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
End Fitting Component and MaterialCOMPLETE FITTING STEEL ALL ENDS
Thread DirectionRIGHT-HAND FIRST END
Nominal Thread Size1.312 INCHES FIRST END IN
Seat Angle37.0 DEGREES FIRST END
Exterior ColorBLACK
Inside Diameter1.000 INCHES NOMINAL IN
Inside Surface ConditionSMOOTH
Media for Which DesignedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
Hydrostatic Test Pressure7000.0 POUNDS PER SQUARE INCH LBS
Thread Class2B FIRST END
Test Data Document81349-MIL-L-52325,PARAGRAPH 4.7.2.1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Burst Test Pressure16000.0 POUNDS PER SQUARE INCH LBS
Thread Quantity Per Inch12 FIRST END
Outer Covering Environmental ProtectionABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
Thread Series DesignatorUN FIRST END
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
4720-00-872-772513211E3280-2 POSSIBLE MATCH
HOSE ASSEMBLY,NONMETALLIC
Possible match (shared part number)Cecom Lr Center
4720-00-872-772613211E3280-1 POSSIBLE MATCH
HOSE ASSEMBLY,NONMETALLIC
Possible match (shared part number)Cecom Lr Center
Cross-Reference Index
Part NumberManufacturer
FB8631-04 PRIMARY Danfoss Power Solutions II, Llc (USA)
FB8631-06 PRIMARY Danfoss Power Solutions II, Llc (USA)
Reference documents
ReferenceMeaning
13211E3280 D/9 Drawing number reference only
U.S. Government activity
13211E3280-4 3/2 Design control — primary reference
U.S. Government activity
Related Parts
4720-00-872-7725POSSIBLE MATCH
HOSE ASSEMBLY,NONMETALLIC
13211E3280-2
4720-00-872-7726POSSIBLE MATCH
HOSE ASSEMBLY,NONMETALLIC
13211E3280-1

Frequently Asked Questions

What is NSN 4720-00-464-4216?

NSN 4720-00-464-4216 is a Hose Assembly,nonmetallic, manufactured by Danfoss Power Solutions II, Llc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.

What part numbers are listed for NSN 4720-00-464-4216?

NSN 4720-00-464-4216 has 2 manufacturer part numbers on file: FB8631-04 (Danfoss Power Solutions II, Llc), FB8631-06 (Danfoss Power Solutions II, Llc).

What NSN replaces 4720-00-464-4216?

2 possible matches (shared part number, not a government interchangeability claim): 4720-00-872-7725, 4720-00-872-7726. Verify interchangeability with system specifications before substitution.

What are the specifications of FB8631-04?

Key specifications for FB8631-04: Measuring Method and Length: 54.000 INCHES NOMINAL OVERALL IN; Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Fitting Component and Surface Treatment: COMPLETE FITTING CADMIUM AND COMPLETE FITTING ZINC FIRST END; Minimum Inside Bending Radius: 12.000 INCHES IN. 26 specifications are documented in the U.S. Government catalog.

Is NSN 4720-00-464-4216 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com