The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-406-7288, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Danfoss Power Solutions II, Llc. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-00-406-7288 |
| Primary Part Number | FK1709EGG0135AA |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Danfoss Power Solutions II, Llc |
| Status | ACTIVE |
| Measuring Method and Length | 12.500 INCHES MINIMUM WORKING AND 13.500 INCHES MAXIMUM WORKING IN |
| Temp Rating | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 2.750 INCHES IN |
| Connection Style | INVERTED FLARE SECOND END |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| End Connection Design | STRAIGHT FIRST END |
| End Connection Design | STRAIGHT SECOND END |
| Layer Composition and Location | 2ND LAYER BRAIDED STEEL WIRE AND 1ST LAYER BRAIDED FABRIC AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| Connection Type | THREADED EXTERNAL PIPE SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.547 INCHES MINIMUM AND 0.637 INCHES MAXIMUM IN |
| Operating Pressure | 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.562 INCHES FIRST END IN |
| Nominal Thread Size | 0.250 INCHES SECOND END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Seat Angle | 30.0 DEGREES SECOND END |
| Inside Diameter | 0.305 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Hydrostatic Test Pressure | 2000.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2B FIRST END |
| Burst Test Pressure | 4000.0 POUNDS PER SQUARE INCH LBS |
| Thread Quantity Per Inch | 18 FIRST END |
| Thread Quantity Per Inch | 18 SECOND END |
| Outer Covering Environmental Protection | MILDEW RESISTANT AND OIL RESISTANT |
| Special Markings | CONTINUOUS WHITE LAYLINE OF ONLY MFRS NAME,SUPPLIERS CODE,SIZE,AND HOSE CURE DATE /QUARTER AND YEAR/ REPEATED AT APPROXIMATELY 12 IN. INTERVALS IN |
| Thread Series Designator | NPTF SECOND END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| FK1709EGG0135AA PRIMARY | Danfoss Power Solutions II, Llc (USA) |
| Reference | Meaning |
|---|---|
| 4720004067288 | 6/9 Informative reference only E.c.a Etablissement Central Des Approvisionnements Des Forces Armees Royales |
| FA5782EGG0135 | 5/9 Secondary reference Danfoss Power Solutions II, Llc |
| 4720004067288 | 5/9 Secondary reference E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
| 10932997-6 | D/9 Drawing number reference only U S Army Tank Automotive Command Amsta-Im-Mm |
| FK1709EGG0135 | 5/9 Secondary reference Danfoss Power Solutions II, Llc |
NSN 4720-00-406-7288 is a Hose Assembly,nonmetallic, manufactured by Danfoss Power Solutions II, Llc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-00-406-7288 has 1 manufacturer part number on file: FK1709EGG0135AA (Danfoss Power Solutions II, Llc).
Key specifications for FK1709EGG0135AA: Measuring Method and Length: 12.500 INCHES MINIMUM WORKING AND 13.500 INCHES MAXIMUM WORKING IN; Temp Rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 2.750 INCHES IN; Connection Style: INVERTED FLARE SECOND END. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.