PartsTable TECHNICAL DATA SHEET
NSN 4720-00-258-2658Government record, cited

Hose Assembly, Nonmetallic4720-00-258-2658

NSN 4720-00-258-2658 · NIIN 002582658
FSC 4720 — Hose and Flexible Tubing · FSG 47 — Pipe, Tubing, Hose, and Fittings
Government record, cited
Also searched as  4720-00-258-2658 · 4720002582658 · NIIN 002582658 · 00-258-2658 · FSC 4720 Hose and Flexible Tubing · 719503-1 · 156115-6D0134-0
Nearby stock numbers  ·
Features
  • Hose Assembly,nonmetallic — FSC 4720
  • Flow Angle: 90.0 DEGREES FIRST END
  • Measuring Method and Length: 13.500 INCHES NOMINAL WORKING IN
  • Temp Rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
  • Minimum Inside Bending Radius: 2.500 INCHES IN
  • Connection Style: SWIVEL NUT FLARE FIRST END
  • End Connection Design: ELBOW FIRST END
  • Layer Composition and Location: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
Identification
  • NSN: 4720-00-258-2658
  • NIIN: 002582658
  • FSC: 4720 — Hose and Flexible Tubing
  • FSG: 47 — Pipe, Tubing, Hose, and Fittings
General Description

The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-258-2658, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN4720-00-258-2658
Item NameHose Assembly,nonmetallic
FSC / FSG4720 / 47 — Hose and Flexible Tubing
StatusACTIVE
Flow Angle90.0 DEGREES FIRST END
Measuring Method and Length13.500 INCHES NOMINAL WORKING IN
Temp Rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
Minimum Inside Bending Radius2.500 INCHES IN
Connection StyleSWIVEL NUT FLARE FIRST END
End Connection DesignELBOW FIRST END
Layer Composition and LocationOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
Angle Between Rigid Elbow Fittings in Deg0.0
Connection TypeTHREADED INTERNAL TUBE FIRST END
Cross-Sectional Shape StyleROUND
Outside Diameter1.500 INCHES NOMINAL IN
Operating Pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
Features ProvidedELECTROSTATIC DISCHARGE CAPABILITY
Thread DirectionRIGHT-HAND FIRST END
Nominal Thread Size0.562 INCHES FIRST END IN
Seat Angle37.0 DEGREES FIRST END
Inside Diameter0.375 INCHES NOMINAL IN
Inside Surface ConditionSMOOTH
Thread Class3B FIRST END
Burst Test Pressure6000.0 POUNDS PER SQUARE INCH LBS
Outer Covering Environmental ProtectionCORROSION RESISTANT
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5998-01-619-6732719503-1 POSSIBLE MATCH
BACKPLANE ASSEMBLY
Possible match (shared part number)Brashear Lp
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
719503-1 7/2 Vendor item drawing reference
U.S. Government activity
156115-6D0134-0 3/2 Design control — primary reference
U.S. Government activity
Related Parts
5998-01-619-6732POSSIBLE MATCH
BACKPLANE ASSEMBLY
719503-1

Frequently Asked Questions

What is NSN 4720-00-258-2658?

NSN 4720-00-258-2658 is a Hose Assembly,nonmetallic, classified under FSC 4720, Hose and Flexible Tubing. Status: active.

What NSN replaces 4720-00-258-2658?

1 possible match (shared part number, not a government interchangeability claim): 5998-01-619-6732. Verify interchangeability with system specifications before substitution.

What are the specifications of 4720-00-258-2658?

Key specifications for 4720-00-258-2658: Flow Angle: 90.0 DEGREES FIRST END; Measuring Method and Length: 13.500 INCHES NOMINAL WORKING IN; Temp Rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 2.500 INCHES IN. 22 specifications are documented in the U.S. Government catalog.

Is NSN 4720-00-258-2658 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com