PartsTable TECHNICAL DATA SHEET
NSN 4720-00-230-6515Government record, cited

Hose Assembly, Nonmetallic4720-00-230-6515

NSN 4720-00-230-6515 · NIIN 002306515
FSC 4720 — Hose and Flexible Tubing · FSG 47 — Pipe, Tubing, Hose, and Fittings
Government record, cited
Also searched as  4720-00-230-6515 · 4720002306515 · NIIN 002306515 · 00-230-6515 · FSC 4720 Hose and Flexible Tubing · 282002-4-120 · M17505-A-4-1000 · MP17505FA41000 · H/A-17505-4-120L · MIL-DTL-17505
Nearby stock numbers  ·
Features
  • Hose Assembly,nonmetallic — FSC 4720
  • Measuring Method and Length: 120.000 INCHES NOMINAL EXCLUDING END FITTINGS IN
  • Fitting Component and Surface Treatment: COMPLETE FITTING CADMIUM AND COMPLETE FITTING ZINC FIRST END
  • Connection Style: SWIVEL NUT, GASKET SEAL SECOND END
  • Connection Style: PLAIN FIRST END
  • End Connection Design: STRAIGHT FIRST END
  • End Connection Design: STRAIGHT SECOND END
  • Layer Composition and Location: 1ST LAYER MOLDED RUBBER, CHLOROPRENE AND 2ND LAYER RUBBER IMPREGNATED WOVEN FABRIC AND 3RD LAYER HELIX WIRE COIL AND 4TH LAYER RUBBER IMPREGNATED WOVEN FABRIC AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
Identification
  • NSN: 4720-00-230-6515
  • NIIN: 002306515
  • FSC: 4720 — Hose and Flexible Tubing
  • FSG: 47 — Pipe, Tubing, Hose, and Fittings
General Description

The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-230-6515, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN4720-00-230-6515
Item NameHose Assembly,nonmetallic
FSC / FSG4720 / 47 — Hose and Flexible Tubing
StatusACTIVE
Measuring Method and Length120.000 INCHES NOMINAL EXCLUDING END FITTINGS IN
Fitting Component and Surface TreatmentCOMPLETE FITTING CADMIUM AND COMPLETE FITTING ZINC FIRST END
Connection StyleSWIVEL NUT, GASKET SEAL SECOND END
Connection StylePLAIN FIRST END
End Connection DesignSTRAIGHT FIRST END
End Connection DesignSTRAIGHT SECOND END
Layer Composition and Location1ST LAYER MOLDED RUBBER, CHLOROPRENE AND 2ND LAYER RUBBER IMPREGNATED WOVEN FABRIC AND 3RD LAYER HELIX WIRE COIL AND 4TH LAYER RUBBER IMPREGNATED WOVEN FABRIC AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
Connection TypeTHREADED EXTERNAL HOSE FIRST END
Connection TypeTHREADED INTERNAL HOSE SECOND END
Cross-Sectional Shape StyleROUND
Operating Pressure150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
Features ProvidedELECTROSTATIC DISCHARGE CAPABILITY
End Fitting Component and MaterialCOMPLETE FITTING COPPER ALLOY ALL ENDS
Thread DirectionRIGHT-HAND SECOND END
Thread DirectionRIGHT-HAND FIRST END
Nominal Thread Size4.000 INCHES SECOND END IN
Nominal Thread Size4.000 INCHES FIRST END IN
Specification/standard Data81349-MIL-H-17505 GOVERNMENT SPECIFICATION
Nondefinitive Spec/std DataA TYPE
Inside Diameter4.000 INCHES NOMINAL IN
Inside Surface ConditionSMOOTH
Media for Which DesignedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
Hydrostatic Test Pressure250.0 POUNDS PER SQUARE INCH LBS
Burst Test Pressure600.0 POUNDS PER SQUARE INCH LBS
Outer Covering Environmental ProtectionABRASION RESISTANT AND LIGHT RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF
Thread Series DesignatorNPT FIRST END
Thread Series DesignatorNH-SPCL SECOND END
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
4720-00-230-6516 POSSIBLE MATCH
HOSE ASSEMBLY,NONMETALLIC
Possible match (shared part number)
4720-00-289-1408 POSSIBLE MATCH
HOSE ASSEMBLY,NONMETALLIC
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
282002-4-120 5/9 Secondary reference
Danfoss Power Solutions II, Llc
M17505-A-4-1000 5/9 Secondary reference
U.S. Government activity
MP17505FA41000 2/2 Government specification standardization
U.S. Government activity
H/A-17505-4-120L 5/1 Secondary reference
Hydrasearch Company, Llc
MIL-DTL-17505 4/1 Identification reference
U.S. Government activity
82002-4 5/1 Secondary reference
Danfoss Power Solutions II, Llc
MIL-H-15100 5/9 Secondary reference
U.S. Government activity
282002-4-120 5/1 Secondary reference
Global Incorporated
Related Parts
4720-00-230-6516POSSIBLE MATCH
HOSE ASSEMBLY,NONMETALLIC
4720-00-289-1408POSSIBLE MATCH
HOSE ASSEMBLY,NONMETALLIC

Frequently Asked Questions

What is NSN 4720-00-230-6515?

NSN 4720-00-230-6515 is a Hose Assembly,nonmetallic, classified under FSC 4720, Hose and Flexible Tubing. Status: active.

What NSN replaces 4720-00-230-6515?

2 possible matches (shared part number, not a government interchangeability claim): 4720-00-230-6516, 4720-00-289-1408. Verify interchangeability with system specifications before substitution.

What are the specifications of 4720-00-230-6515?

Key specifications for 4720-00-230-6515: Measuring Method and Length: 120.000 INCHES NOMINAL EXCLUDING END FITTINGS IN; Fitting Component and Surface Treatment: COMPLETE FITTING CADMIUM AND COMPLETE FITTING ZINC FIRST END; Connection Style: SWIVEL NUT, GASKET SEAL SECOND END; Connection Style: PLAIN FIRST END. 27 specifications are documented in the U.S. Government catalog.

Is NSN 4720-00-230-6515 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com