The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-203-9659, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Society of Automotive Engineers Inc. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 4720-00-203-9659 |
| Primary Part Number | 100R2TABLE1 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Society of Automotive Engineers Inc |
| Status | CANCELLED |
| Layer Composition and Location | 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED STEEL WIRE |
| End Connection Design | STRAIGHT FIRST END |
| Thread Direction | RIGHT-HAND FIRST END |
| Temp Rating | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH LBS |
| Outside Diameter | 0.968 INCHES NOMINAL IN |
| Connection Type | THREADED EXTERNAL PIPE FIRST END |
| Thread Class | 2B FIRST END |
| Nominal Thread Size | 0.500 INCHES FIRST END IN |
| Measuring Method and Length | 18.250 INCHES NOMINAL OVERALL IN |
| Nondefinitive Spec/std Data | 2 TYPE AND A CLASS |
| Minimum Inside Bending Radius | 7.000 INCHES IN |
| Hydrostatic Test Pressure | 7000.0 POUNDS PER SQUARE INCH LBS |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Operating Pressure | 3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Specification/standard Data | 81349-MIL-H-13531 GOVERNMENT SPECIFICATION |
| Outer Covering Environmental Protection | OZONE RESISTANT AND WEATHERPROOF |
| Thread Series Designator | UNF FIRST END |
| Inside Diameter | 0.500 INCHES NOMINAL IN |
| Cross-Sectional Shape Style | ROUND |
| Seat Angle | 30.0 DEGREES FIRST END |
| Inside Surface Condition | SMOOTH |
| Connection Style | PLAIN FIRST END |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 100R2TABLE1 | Society of Automotive Engineers Inc (USA) |
| P6123 | Bomag Usa Sub of United Dominion Industries Ltd (USA) |
| 100R2TABLE1 | Sae International Dba Sae International (USA) |
NSN 4720-00-203-9659 is a Hose Assembly,nonmetallic, manufactured by Society of Automotive Engineers Inc, classified under FSC 4720 (No Item Name Available). Status: cancelled.
NSN 4720-00-203-9659 has 3 cross-referenced part numbers: 100R2TABLE1 (Society of Automotive Engineers Inc), P6123 (Bomag Usa Sub of United Dominion Industries Ltd), 100R2TABLE1 (Sae International Dba Sae International).
There is 1 known substitute for 4720-00-203-9659: 8030-01-169-1113. Verify interchangeability with system specifications before substitution.
Key specifications for 100R2TABLE1: Layer Composition and Location: 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED STEEL WIRE; End Connection Design: STRAIGHT FIRST END; Thread Direction: RIGHT-HAND FIRST END; Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF. 23 total characteristics are documented in the Federal Logistics Information System.
NSN 4720-00-203-9659 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.