The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-131-5491, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Dana Off Highway Products, Llc. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-00-131-5491 |
| Primary Part Number | 1504454 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Dana Off Highway Products, Llc |
| Status | ACTIVE |
| Measuring Method and Length | 43.000 INCHES NOMINAL OVERALL IN |
| Temp Rating | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 9.500 INCHES IN |
| Connection Style | FLARED FIRST END |
| Connection Style | PLAIN SECOND END |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED COTTON CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Connection Type | THREADED EXTERNAL PIPE SECOND END |
| Connection Type | THREADED EXTERNAL TUBE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 1.250 INCHES NOMINAL IN |
| Operating Pressure | 2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| End Fitting Component and Material | COMPLETE FITTING STEEL ALL ENDS |
| Thread Direction | RIGHT-HAND SECOND END |
| Thread Direction | RIGHT-HAND FIRST END |
| Nominal Thread Size | 0.750 INCHES SECOND END IN |
| Nominal Thread Size | 1.062 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Seat Angle | 30.0 DEGREES SECOND END |
| Specification/standard Data | SAE J517,100R2,TYPE A-81343 NATIONAL STD/SPEC |
| Inside Diameter | 0.750 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | HYDRAULIC FLUID SINGLE RESPONSE |
| Hydrostatic Test Pressure | 4500.0 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A FIRST END A |
| Burst Test Pressure | 9000.0 POUNDS PER SQUARE INCH LBS |
| Thread Quantity Per Inch | 12 FIRST END |
| Outer Covering Environmental Protection | ABRASION RESISTANT AND COLD RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| Thread Series Designator | UN FIRST END |
| Thread Series Designator | NPTF SECOND END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 1504454 PRIMARY | Dana Off Highway Products, Llc (USA) |
| Reference | Meaning |
|---|---|
| 12C12MS12BMJS43 | 5/9 Secondary reference Contitech Usa, Inc. |
| 12C12MS12BMJS43 | 5/9 Secondary reference Goodyear Tire and Rubber Co the |
| 12C12MS12BMJS43 | 5/9 Secondary reference Contitech Usa, Inc Dba Veyance Technologies |
| 1504454 | 3/9 Design control — primary reference Vme Americas Inc Sub of Vme Group N V |
| 12C12MS12BMJS43 | 5/9 Secondary reference Anchor Swan Corp Sub of Amerace Corp |
NSN 4720-00-131-5491 is a Hose Assembly,nonmetallic, manufactured by Dana Off Highway Products, Llc, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-00-131-5491 has 1 manufacturer part number on file: 1504454 (Dana Off Highway Products, Llc).
1 possible match (shared part number, not a government interchangeability claim): 2825-00-309-1648. Verify interchangeability with system specifications before substitution.
Key specifications for 1504454: Measuring Method and Length: 43.000 INCHES NOMINAL OVERALL IN; Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 9.500 INCHES IN; Connection Style: FLARED FIRST END. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.