The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-110-9044, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-00-110-9044 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Status | ACTIVE |
| Measuring Method and Length | 7.2000 INCHES MINIMUM EXCLUDING END FITTINGS AND 7.300 INCHES MAXIMUM EXCLUDING END FITTINGS IN |
| Temp Rating | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 1.500 INCHES IN |
| Layer Composition and Location | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 0.250 INCHES NOMINAL IN |
| Operating Pressure | 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Inside Diameter | 0.125 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Hydrostatic Test Pressure | 3000.0 POUNDS PER SQUARE INCH LBS |
| Burst Test Pressure | 12000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | CORROSION RESISTANT |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 698488-2 | 3/2 Design control — primary reference U.S. Government activity |
NSN 4720-00-110-9044 is a Hose Assembly,nonmetallic, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
Key specifications for 4720-00-110-9044: Measuring Method and Length: 7.2000 INCHES MINIMUM EXCLUDING END FITTINGS AND 7.300 INCHES MAXIMUM EXCLUDING END FITTINGS IN; Temp Rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF; Minimum Inside Bending Radius: 1.500 INCHES IN; Layer Composition and Location: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.