The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-00-084-3636, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Leonardo Spa Aeronautics Division - Pomigliano D'arco Site. Government technical data includes 24 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-00-084-3636 |
| Primary Part Number | AN6270-6D-0190 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Leonardo Spa Aeronautics Division - Pomigliano D'arco Site |
| Status | ACTIVE |
| Vacuum in Torr | 254.0 |
| End Fitting Component and Material | NUT STEEL FIRST END |
| Inside Diameter | 0.375 INCHES NOMINAL IN |
| End Fitting Component and Material | NIPPLE STEEL ALL ENDS |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| Operating Pressure | 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Measuring Method and Length | 19.000 INCHES NOMINAL WORKING IN |
| Temp Rating | -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Thread Class | 3B FIRST END |
| End Fitting Component and Material | SOCKET ALUMINUM ALLOY SECOND END |
| Thread Series Designator | UNF FIRST END |
| Hydrostatic Test Pressure | 300.0 POUNDS PER SQUARE INCH LBS |
| Layer Composition and Location | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Nominal Thread Size | 0.562 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES FIRST END |
| Burst Test Pressure | 1000.0 POUNDS PER SQUARE INCH LBS |
| Specification/standard Data | 88044-AN6270 GOVERNMENT STANDARD |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Thread Direction | RIGHT-HAND FIRST END |
| Inside Surface Condition | SMOOTH |
| Outer Covering Environmental Protection | FUEL RESISTANT AND OIL RESISTANT |
| Outside Diameter | 0.625 INCHES NOMINAL IN |
| Cross-Sectional Shape Style | ROUND |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN6270-6D-0190 | Leonardo Spa Aeronautics Division - Pomigliano D'arco Site (ITA) |
| AN6270 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| 193000-6D-0190 | Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division (USA) |
| AN6270-6D-0190 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
NSN 4720-00-084-3636 is a Hose Assembly,nonmetallic, manufactured by Leonardo Spa Aeronautics Division - Pomigliano D'arco Site, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-00-084-3636 has 4 cross-referenced part numbers: AN6270-6D-0190 (Leonardo Spa Aeronautics Division - Pomigliano D'arco Site), AN6270 (Aeronautical Standards Group Dept of Navy and Air Force), 193000-6D-0190 (Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division), AN6270-6D-0190 (Aeronautical Standards Group Dept of Navy and Air Force).
There is 1 known substitute for 4720-00-084-3636: 4720-00-720-1096. Verify interchangeability with system specifications before substitution.
Key specifications for AN6270-6D-0190: Vacuum in Torr: 254.0; End Fitting Component and Material: NUT STEEL FIRST END; Inside Diameter: 0.375 INCHES NOMINAL IN; End Fitting Component and Material: NIPPLE STEEL ALL ENDS. 25 total characteristics are documented in the Federal Logistics Information System.