The Hose,nonmetallic, cataloged under National Stock Number 4720-00-054-6358, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 16 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 4 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 4720-00-054-6358 |
| Primary Part Number | MIL-DTL-13531 |
| Item Name | Hose,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | CANCELLED |
| Outside Diameter | 1.125 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN |
| Media for Which Designed | HYDRAULIC FLUID, SILICATE-ESTER BASE SINGLE RESPONSE |
| Specification/standard Data | 81349-MIL-H-13531 GOVERNMENT SPECIFICATION |
| Nondefinitive Spec/std Data | 2 TYPE AND B CLASS |
| Material | RUBBER SYNTHETIC TUBE |
| Measuring Method and Length | 120.000 INCHES NOMINAL EXCLUDING END FITTINGS IN |
| Hydrostatic Test Pressure | 4500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS |
| Operating Pressure | 2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS |
| Inside Surface Condition | SMOOTH |
| Outer Covering Environmental Protection | MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| Burst Test Pressure | 9000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| Inside Diameter | 0.735 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN |
| Cross-Sectional Shape Style | ROUND |
| Temp Rating | -67.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Minimum Inside Bending Radius | 9.500 INCHES IN |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-DTL-13531 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MILH13531 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| J412 | Imperial (USA) |
NSN 4720-00-054-6358 is a Hose,nonmetallic, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 4720 (No Item Name Available). Status: cancelled.
NSN 4720-00-054-6358 has 3 cross-referenced part numbers: MIL-DTL-13531 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MILH13531 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), J412 (Imperial).
There are 4 known substitutes for 4720-00-054-6358: 6515-00-913-7908, 5930-01-052-5583, 5120-01-399-9450 and 1 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-DTL-13531: Outside Diameter: 1.125 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN; Media for Which Designed: HYDRAULIC FLUID, SILICATE-ESTER BASE SINGLE RESPONSE; Specification/standard Data: 81349-MIL-H-13531 GOVERNMENT SPECIFICATION; Nondefinitive Spec/std Data: 2 TYPE AND B CLASS. 16 total characteristics are documented in the Federal Logistics Information System.
NSN 4720-00-054-6358 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.