The Hose,nonmetallic, cataloged under National Stock Number 4720-00-054-6357, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Imperial. Government technical data includes 16 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 4720-00-054-6357 |
| Primary Part Number | J408 |
| Item Name | Hose,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Imperial |
| Status | CANCELLED |
| Minimum Inside Bending Radius | 7.000 INCHES IN |
| Temp Rating | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Operating Pressure | 3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS |
| Material | RUBBER SYNTHETIC TUBE |
| Measuring Method and Length | 120.000 INCHES NOMINAL EXCLUDING END FITTINGS IN |
| Specification/standard Data | 81349-MIO-H-13531 GOVERNMENT SPECIFICATION |
| Nondefinitive Spec/std Data | 2 TYPE AND B CLASS |
| Outer Covering Environmental Protection | MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| Inside Surface Condition | SMOOTH |
| Hydrostatic Test Pressure | 7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS |
| Media for Which Designed | HYDRAULIC FLUID, SILICATE-ESTER BASE SINGLE RESPONSE |
| Outside Diameter | 0.841 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN |
| Cross-Sectional Shape Style | ROUND |
| Inside Diameter | 0.485 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| J408 | Imperial (USA) |
| MILH13531 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-DTL-13531 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 4720-00-054-6357 is a Hose,nonmetallic, manufactured by Imperial, classified under FSC 4720 (No Item Name Available). Status: cancelled.
NSN 4720-00-054-6357 has 3 cross-referenced part numbers: J408 (Imperial), MILH13531 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-DTL-13531 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 3 known substitutes for 4720-00-054-6357: 4820-00-276-8961, 4820-01-228-4324, 5120-01-399-9447. Verify interchangeability with system specifications before substitution.
Key specifications for J408: Minimum Inside Bending Radius: 7.000 INCHES IN; Temp Rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF; Layer Composition and Location: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC; Operating Pressure: 3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. 16 total characteristics are documented in the Federal Logistics Information System.
NSN 4720-00-054-6357 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.