PartsTable
Technical Data Sheet
Download PDF

4715319 — FLANGE,PIPE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

4715319: FLANGE,PIPE.

The FLANGE,PIPE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, thickness: 0.500 INCHES NOMINAL IN, neck_height: 0.500 INCHES NOMINAL IN, socket_depth: 0.750 INCHES NOMINAL IN, bore_diameter: 2.710 INCHES NOMINAL IN, flange_diameter: 6.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-420-1148, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4715319
NSN: 4730-01-420-1148
NIINs: 014201148, 014202542, 014202545, 014202547, 014214715, 014215288, 014218152, 014218154, 014218156, 014218828, 014227848, 014227851, 014635638, 014645339, 014645352
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialCOPPER ALLOY
thickness0.500 INCHES NOMINAL IN
neck_height0.500 INCHES NOMINAL IN
socket_depth0.750 INCHES NOMINAL IN
bore_diameter2.710 INCHES NOMINAL IN
flange_diameter6.125 INCHES NOMINAL IN
recess_diameter10.376 INCHES NOMINAL IN
socket_diameter2.913 INCHES NOMINAL IN
special_featuresMAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED ARE 150.0 POUNDS PER SQUARE INCH AND WATER, GAS AND OIL LBS
style_designatorROUND, ONE BOLT HOLE CIRCLE
bolt_hole_diameter0.562 INCHES NOMINAL IN
bolt_hole_quantity10
NSN4730-01-420-1148
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 4715319 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 16.000 INCHES NOMINAL IN
•
FACE SEATING SURFACE CONDITION: MACHINED
•
NOMINAL PIPE SIZE FOR WHICH DESIGNED: 10.000 INCHES IN
•
SOCKET DEPTH: 1.062 INCHES NOMINAL IN
•
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED: 150.0 FAHRENHEIT GAS AND 150.0 FAHRENHEIT OIL AND 150.0 FAHRENHEIT WATER DEGF
•
OPERATING PRESSURE AND TYPE: 200.0 POUNDS PER SQUARE INCH (PSI) GAS MAXIMUM REQUIRED AND 200.0 POUNDS PER SQUARE INCH (PSI) OIL MAXIMUM REQUIRED AND 200.0 POUNDS PER SQUARE INCH (PSI) WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
•
FLANGE SECTION STYLE: PLAIN FACE, SOCKET NECK
•
STYLE DESIGNATOR: ROUND, ONE BOLT HOLE CIRCLE
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER16.000 INCHES NOMINAL IN
FACE SEATING SURFACE CONDITIONMACHINED
NOMINAL PIPE SIZE FOR WHICH DESIGNED10.000 INCHES IN
SOCKET DEPTH1.062 INCHES NOMINAL IN
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED150.0 FAHRENHEIT GAS AND 150.0 FAHRENHEIT OIL AND 150.0 FAHRENHEIT WATER DEGF
OPERATING PRESSURE AND TYPE200.0 POUNDS PER SQUARE INCH (PSI) GAS MAXIMUM REQUIRED AND 200.0 POUNDS PER SQUARE INCH (PSI) OIL MAXIMUM REQUIRED AND 200.0 POUNDS PER SQUARE INCH (PSI) WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
FLANGE SECTION STYLEPLAIN FACE, SOCKET NECK
STYLE DESIGNATORROUND, ONE BOLT HOLE CIRCLE
BOLT HOLE DIAMETER1.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-15726 MIL SPEC SINGLE MATERIAL RESPONSE
SUBSTITUTES & CROSS-REFERENCES 4
4715319 10 INCHReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
810-4715319 FIG 2-CReference document
Same NSN cross-reference
Reference document — Secondary reference
4715319 ITEM 9Reference document
Same NSN cross-reference
Reference document — Secondary reference
810-4715319 ITEM 9Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4715319?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4715319?
4715319 is a FLANGE,PIPE.
What parts can replace 4715319?
There are 4 known substitutes for 4715319: 4715319 10 INCH, 810-4715319 FIG 2-C, 4715319 ITEM 9 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4715319?
4715319 is cataloged in the U.S. Government catalog under NSN 4730-01-420-1148. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4715319

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.