PartsTable
Technical Data Sheet
Download PDF

4616-73 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

4616-73: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include cover: NOT PROVIDED, insert: NOT INCLUDED, material: PLASTIC LOCATION NOT OTHERWISE SPECIFIED, design_type: FREE STANDING, overall_width: 31.000 INCHES NOMINAL IN, overall_height: 37.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-447-4855, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4616-73
NSN: 3110-00-447-4855
NIINs: 004474855, 015974943
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
coverNOT PROVIDED
insertNOT INCLUDED
materialPLASTIC LOCATION NOT OTHERWISE SPECIFIED
design_typeFREE STANDING
overall_width31.000 INCHES NOMINAL IN
overall_height37.000 INCHES NOMINAL IN
overall_length43.750 INCHES NOMINAL IN
special_featuresCAPACITY: 500 LBS.; MOUNTED ON FOUR CASTER WHEELS; EASY TO MANEUVER; RECYCLE LOGO ON SIDE LBS
NSN3110-00-447-4855
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 4616-73 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
OUTER RING WIDTH: 1.3850 INCHES NOMINAL IN
•
INTERNAL CLEARANCE: 0.0013 INCHES MINIMUM RADIAL AND 0.0032 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 7.0876 INCHES MINIMUM AND 7.0886 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
OUTER RING WIDTH1.3850 INCHES NOMINAL IN
INTERNAL CLEARANCE0.0013 INCHES MINIMUM RADIAL AND 0.0032 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER7.0876 INCHES MINIMUM AND 7.0886 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESSPLIT INNER RING
BORE DIAMETER3.9344 INCHES MINIMUM AND 3.9353 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY RETAINER
SUBSTITUTES & CROSS-REFERENCES 3
21D334Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
D2-39473Reference document
Same NSN cross-reference
Reference document — Secondary reference
9220U23Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4616-73?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4616-73?
4616-73 is a BEARING,BALL,ANNULAR.
What parts can replace 4616-73?
There are 3 known substitutes for 4616-73: 21D334, D2-39473, 9220U23. Substitute compatibility should be verified for your specific system.
What is the NSN for 4616-73?
4616-73 is cataloged in the U.S. Government catalog under NSN 3110-00-447-4855. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4616-73