PartsTable
Technical Data Sheet
PartsTable / O-RING / 457-60-16
457-60-16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: SILICON SEMICONDUCTOR, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, overall_length: 0.450 INCHES MAXIMUM IN, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL, mounting_method: THREADED STUD(S), overall_diameter: 0.667 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-724-4286, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
457-60-16
NSN: 5331-00-724-4286
FSC: 5331 — O-RING
CAGE: 77308 — PARCO, LLC (USA)
SPECIFICATIONS
materialSILICON SEMICONDUCTOR
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
overall_length0.450 INCHES MAXIMUM IN
hardness_rating60.0 SHORE DUROMETER A NOMINAL
mounting_methodTHREADED STUD(S)
overall_diameter0.667 INCHES MAXIMUM IN
features_providedHERMETICALLY SEALED CASE
nominal_thread_size0.250 INCHES IN
center_hole_diameter0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
thread_series_designatorUNF
mounting_facility_quantity1
NSN5331-00-724-4286
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 457-60-16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
MS29512-16Interchangeable
interchangeable cross-reference
interchangeable
GHN10094-10Interchangeable
interchangeable cross-reference
interchangeable
SR-822A-60-16Interchangeable
interchangeable cross-reference
interchangeable
MILS19500-358Interchangeable
interchangeable cross-reference
interchangeable
457-6016Interchangeable
interchangeable cross-reference
interchangeable
JAN1N3321BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 457-60-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 457-60-16?
457-60-16 is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace 457-60-16?
There are 9 known substitutes for 457-60-16: MS29512-16, GHN10094-10, SR-822A-60-16 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 457-60-16?
457-60-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-724-4286. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 457-60-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026