PartsTable
Technical Data Sheet
PartsTable / MRO / 45-00-00
45-00-00 ✓ Verified by PartsTable
Ugreen · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include length: 0.250 INCHES NOMINAL IN, material: STEEL COMP 304, body_style: W/MTG HOLE(S)/SLOT(S), TERMINALS ON OPPOSITE SURFACES, body_width: 1.125 INCHES MAXIMUM IN, body_height: 0.453 INCHES MAXIMUM IN, body_length: 0.725 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-194-3674, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 45-00-00
NSN: 5330-00-194-3674
FSC: 5330
CAGE: 08786 — TAYLOR-DUNN MANUFACTURING, LLC (USA)
SPECIFICATIONS
length0.250 INCHES NOMINAL IN
materialSTEEL COMP 304
body_styleW/MTG HOLE(S)/SLOT(S), TERMINALS ON OPPOSITE SURFACES
body_width1.125 INCHES MAXIMUM IN
body_height0.453 INCHES MAXIMUM IN
body_length0.725 INCHES NOMINAL IN
design_typeTUBULAR
turn_quantity18 SINGLE COMPONENT SINGLE WINDING
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
quality_factor50 MINIMUM SINGLE COMPONENT SINGLE WINDING
mounting_methodTERMINAL SINGLE GROUP
NSN5330-00-194-3674
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45-00-00 MFR: Ugreen ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
4-50000Interchangeable
interchangeable cross-reference
interchangeable
1445LInterchangeable
interchangeable cross-reference
interchangeable
7722350P1REVBInterchangeable
interchangeable cross-reference
interchangeable
4500Interchangeable
interchangeable cross-reference
interchangeable
447463C1Interchangeable
interchangeable cross-reference
interchangeable
4500000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 45-00-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45-00-00?
45-00-00 is a CAPACITOR,FIXED,MICA DIELECTRIC manufactured by Ugreen. It is classified as a MRO (MRO_GENERAL).
What parts can replace 45-00-00?
There are 7 known substitutes for 45-00-00: 4-50000, 1445L, 7722350P1REVB and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 45-00-00?
45-00-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-194-3674. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45-00-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026