PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100-CA-1834
100-CA-1834 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The TERMINAL,STUD is a the manufacturer industrial component. Key specifications include material: IRON ALLOY OVERALL, corner_shape: SQUARE INSIDE RIGHT CORNER, flange_width: 0.4375 INCHES NOMINAL IN, hole_diameter: 0.2500 INCHES NOMINAL AND 0.1887 INCHES NOMINAL FIRST IN, overall_length: 1.8125 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES INTERMEDIATE LAYER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-695-2525, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-CA-1834
NSN: 5305-01-695-2525
FSC: 5305
CAGE: 1NPW9 — 901 D LLC DIV CURTISS-WRIGHT 901D (USA)
SPECIFICATIONS
materialIRON ALLOY OVERALL
corner_shapeSQUARE INSIDE RIGHT CORNER
flange_width0.4375 INCHES NOMINAL IN
hole_diameter0.2500 INCHES NOMINAL AND 0.1887 INCHES NOMINAL FIRST IN
overall_length1.8125 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES INTERMEDIATE LAYER
keyway_dimension0.3750 INCHES NOMINAL INTERNAL KEYWAY WIDTH IN
special_featuresOD OF BODY TAPERED
style_designatorSPLIT, EXTERNAL FLANGE ONE END
body_inside_diameter1.6875 INCHES NOMINAL IN
body_outside_diameter2.1875 INCHES NOMINAL IN
flange_outside_diameter3.1875 INCHES NOMINAL IN
NSN5305-01-695-2525
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 100-CA-1834 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
5025-595Interchangeable
interchangeable cross-reference
interchangeable
4100007Interchangeable
interchangeable cross-reference
interchangeable
P650-150G-EIXInterchangeable
interchangeable cross-reference
interchangeable
4400020Interchangeable
interchangeable cross-reference
interchangeable
100-CA-1834Interchangeable
interchangeable cross-reference
interchangeable
4500000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100-CA-1834?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-CA-1834?
100-CA-1834 is a TERMINAL,STUD.
What parts can replace 100-CA-1834?
There are 12 known substitutes for 100-CA-1834: 5025-595, 4100007, P650-150G-EIX and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-CA-1834?
100-CA-1834 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-695-2525. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-CA-1834

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026