PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 447-095
447-095 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.1406 INCHES NOMINAL IN, bore_diameter: 3.7500 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1406 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3597, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
447-095
NSN: 3110-00-100-3597
FSC: 3110
CAGE: 90031 — THE RAYMOND CORP DBA RAYMOND SALES CORP DIV THE RAYMOND CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.1406 INCHES NOMINAL IN
bore_diameter3.7500 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.1406 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-3597
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 447-095 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 3.7500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE WIDTH: 1.1406 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER3.7500 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
CONE WIDTH1.1406 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
A8738Interchangeable
interchangeable cross-reference
interchangeable
AA500Interchangeable
interchangeable cross-reference
interchangeable
42376Interchangeable
interchangeable cross-reference
interchangeable
P10-0853Interchangeable
interchangeable cross-reference
interchangeable
2191P10-0853Interchangeable
interchangeable cross-reference
interchangeable
P18-1032Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 447-095?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 447-095?
447-095 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 447-095?
There are 11 known substitutes for 447-095: A8738, AA500, 42376 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 447-095?
447-095 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3597. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 447-095

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026