PartsTable
Technical Data Sheet
42376 ✓ Verified by PartsTable
schleich · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The Australian Shepherd is a very sporty, energetic dog.<br><br>The Australian Shepherd is a very sporty, energetic dog. It loves being outside and herding sheep. The new kennel offers it protection from wind and rain.

In order to keep out the cold weather, the kennel is insulated with a thick, warm layer of padding. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3597, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 42376
NSN: 3110-00-100-3597
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width1.656 INCHES NOMINAL IN
cone_width1.1406 INCHES NOMINAL IN
body_height0.969 INCHES NOMINAL IN
body_length3.375 INCHES NOMINAL IN
design_formSTRAIGHT
bore_diameter3.7500 INCHES NOMINAL IN
inclosure_typeHERMETICALLY SEALED
style_designatorNORMAL ANGLE
cone_corner_radius0.1406 INCHES NOMINAL IN
nominal_overall_length20.000 INCHES IN
nominal_outside_diameter5.000 INCHES IN
NSN3110-00-100-3597
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 42376 · schleich ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
BORE DIAMETER: 3.7500 INCHES NOMINAL IN
STYLE DESIGNATOR: NORMAL ANGLE
CONE WIDTH: 1.1406 INCHES NOMINAL IN
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER3.7500 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
CONE WIDTH1.1406 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
A8738Interchangeable
interchangeable cross-reference
interchangeable
AA500Interchangeable
interchangeable cross-reference
interchangeable
42376Interchangeable
interchangeable cross-reference
interchangeable
P10-0853Interchangeable
interchangeable cross-reference
interchangeable
2191P10-0853Interchangeable
interchangeable cross-reference
interchangeable
P18-1032Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 42376?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42376?
42376 is a FILTER,RADIO FREQUENCY INTERFERE manufactured by schleich. It is classified as a MRO (MRO_GENERAL).
What parts can replace 42376?
There are 12 known substitutes for 42376: A8738, AA500, 42376 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 42376?
42376 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3597. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42376