PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 44156
44156 ✓ Verified by PartsTable
Sandberg · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This compact USB-C charger provides you with 2 lightning fast USB-C ports to charge your devices. You can choose to use one of the ports at the full power of 65W, which is sufficient to charge most laptops with a USB-C connector. Or you can use both ports at the same time, which means that the performance is distributed and can be used for simultaneous charging of a smartphone and a tablet or netbook, for example.

Safety approved and built into a fire-retardant case. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3602, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
44156
NSN: 3110-00-100-3602
FSC: 3110
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
legend_typeUPPERCASE
special_featuresPRE-INKED,IMPRESSION SIZE 0.500 X 1.625 IN.,COLOR-RED,PRINTS-COMPLETED IN
NSN3110-00-100-3602
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 44156 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 0.9330 INCHES NOMINAL IN
•
BORE DIAMETER: 1.5625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STEEP ANGLE
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0938 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH0.9330 INCHES NOMINAL IN
BORE DIAMETER1.5625 INCHES NOMINAL IN
STYLE DESIGNATORSTEEP ANGLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
537818Interchangeable
interchangeable cross-reference
interchangeable
37818Interchangeable
interchangeable cross-reference
interchangeable
07-209895Interchangeable
interchangeable cross-reference
interchangeable
209895Interchangeable
interchangeable cross-reference
interchangeable
208317Interchangeable
interchangeable cross-reference
interchangeable
631923Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 44156?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44156?
44156 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Sandberg.
What parts can replace 44156?
There are 14 known substitutes for 44156: 537818, 37818, 07-209895 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44156?
44156 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3602. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44156

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026