PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 209895
209895 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thread_length: 32.0 MILLIMETERS MM, special_features: 7.3MM CANNULATED; 95MM LONG MM, outside_thread_diameter: 7.3 MILLIMETERS NOMINAL MM, thread_pitch_in_millimeters: 2.75, part_name_assigned_by_controlling_agency: SCREW BONE CRS 7.3MM O/S THREAD DIA CANNULATED 95MM LG MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3602, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
209895
NSN: 3110-00-100-3602
FSC: 3110
CAGE: 25681 — ITT GOULDS PUMPS, INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thread_length32.0 MILLIMETERS MM
special_features7.3MM CANNULATED; 95MM LONG MM
outside_thread_diameter7.3 MILLIMETERS NOMINAL MM
thread_pitch_in_millimeters2.75
part_name_assigned_by_controlling_agencySCREW BONE CRS 7.3MM O/S THREAD DIA CANNULATED 95MM LG MM
NSN3110-00-100-3602
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 209895 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 0.9330 INCHES NOMINAL IN
•
BORE DIAMETER: 1.5625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STEEP ANGLE
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0938 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH0.9330 INCHES NOMINAL IN
BORE DIAMETER1.5625 INCHES NOMINAL IN
STYLE DESIGNATORSTEEP ANGLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
537818Interchangeable
interchangeable cross-reference
interchangeable
37818Interchangeable
interchangeable cross-reference
interchangeable
07-209895Interchangeable
interchangeable cross-reference
interchangeable
209895Interchangeable
interchangeable cross-reference
interchangeable
208317Interchangeable
interchangeable cross-reference
interchangeable
631923Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 209895?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 209895?
209895 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 209895?
There are 14 known substitutes for 209895: 537818, 37818, 07-209895 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 209895?
209895 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3602. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 209895

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026