PartsTable
Technical Data Sheet
Download PDF

42X4 — CAPACITOR,FIXED,PLASTIC DIELECTR

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

42X4: CAPACITOR,FIXED,PLASTIC DIELECTR.

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: COPPER ALLOY OVERALL, seat_angle: 45.0 DEGREES ALL ENDS, thread_class: 2A ALL ENDS A, connection_type: THREADED EXTERNAL TUBE ALL ENDS, connection_style: FLARED (TUBE) ALL ENDS, style_designator: FLARED W/ CENTER WRENCHING FACILITY. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-010-3496, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
42X4
NSN: 5315-00-010-3496
NIINs: 000103496, 002776988
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 58275 — SASCO INC CANADIAN DIV
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
seat_angle45.0 DEGREES ALL ENDS
thread_class2A ALL ENDS A
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
connection_styleFLARED (TUBE) ALL ENDS
style_designatorFLARED W/ CENTER WRENCHING FACILITY
nominal_thread_size0.438 INCHES ALL ENDS IN
maximum_operating_temp250.0 FAHRENHEIT SINGLE RESPONSE DEGF
nominal_overall_length1.170 INCHES IN
end_item_identificationGRUMMAN A-10 ACFT
thread_series_designatorUNF ALL ENDS
nondefinitive_spec/std_data1B FIGURE
NSN5315-00-010-3496
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 42X4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.078 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.094 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.1094 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.078 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.094 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.1094 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
DIAMETER0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
SUBSTITUTES & CROSS-REFERENCES 8
11-4785Reference document
Same NSN cross-reference
Reference document — Secondary reference
2708 1-2 4AReference document
Same NSN cross-reference
Reference document — Secondary reference
SN1104Reference document
Same NSN cross-reference
Reference document — Secondary reference
N22265AReference document
Same NSN cross-reference
Reference document — Secondary reference
S14X4Reference document
Same NSN cross-reference
Reference document — Secondary reference
EE-49756Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 42X4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42X4?
42X4 is a CAPACITOR,FIXED,PLASTIC DIELECTR.
What parts can replace 42X4?
There are 8 known substitutes for 42X4: 11-4785, 2708 1-2 4A, SN1104 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 42X4?
42X4 is cataloged in the U.S. Government catalog under NSN 5315-00-010-3496. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42X4