PartsTable
Technical Data Sheet
Download PDF

2708 1-2 4A — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2708 1-2 4A: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.125 INCHES NOMINAL IN, diameter: 0.375 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.078 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-010-3496, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2708 1-2 4A
NSN: 5315-00-010-3496
NIINs: 000103496, 002764346
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 71843 — CLEVELAND HARDWARE AND FORGING COMPANY DBA FOX VALLEY FORGE (USA)
SPECIFICATIONS
height0.125 INCHES NOMINAL IN
diameter0.375 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleFLAT
chamfer_length0.078 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.500 INCHES NOMINAL IN
under_head_length1.094 INCHES NOMINAL IN
first_hole_diameter0.106 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
material_document_and_classificationQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-010-3496
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2708 1-2 4A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.078 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.094 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.1094 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.078 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.094 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.1094 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
DIAMETER0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
SUBSTITUTES & CROSS-REFERENCES 7
11-4785Reference document
Same NSN cross-reference
Reference document — Secondary reference
SN1104Reference document
Same NSN cross-reference
Reference document — Secondary reference
N22265AReference document
Same NSN cross-reference
Reference document — Secondary reference
S14X4Reference document
Same NSN cross-reference
Reference document — Secondary reference
EE-49756Reference document
Same NSN cross-reference
Reference document — Secondary reference
8075429PC114785Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2708 1-2 4A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2708 1-2 4A?
2708 1-2 4A is a PIN,STRAIGHT,HEADED.
What parts can replace 2708 1-2 4A?
There are 7 known substitutes for 2708 1-2 4A: 11-4785, SN1104, N22265A and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2708 1-2 4A?
2708 1-2 4A is cataloged in the U.S. Government catalog under NSN 5315-00-010-3496. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2708 1-2 4A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.