PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 416949-20
416949-20 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, length: 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_height: 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-014-9320, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
416949-20
NSN: 5340-01-014-9320
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
length0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
materialSTEEL OVERALL
hole_diameter0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
hole_quantity2
overall_height0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
style_designatorSTANDOFF
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
loop/holding_dimension0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.190 INCHES NOMINAL IN
NSN5340-01-014-9320
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 416949-20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
•
LOOP/HOLDING DIMENSION: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
LENGTH: 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
LENGTH0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL HEIGHT0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
HOLE DIAMETER0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.190 INCHES NOMINAL IN
STYLE DESIGNATORSTANDOFF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2Upgraded Successor
successor cross-reference
successor
MILC24066-2Upgraded Successor
successor cross-reference
successor
M24066/2-011Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 416949-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 416949-20?
416949-20 is a CLIP,SPRING TENSION.
What parts can replace 416949-20?
There are 26 known substitutes for 416949-20: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 23 more. Substitute compatibility should be verified for your specific system.
Is 416949-20 still available?
416949-20 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 416949-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026