Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 1.050 INCHES NOMINAL IN, material: COPPER ALLOY 172 AND COPPER ALLOY 170 OVERALL, hole_diameter: 0.144 INCHES NOMINAL IN, overall_height: 1.210 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-172-5424, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
416949-136
NSN:5340-00-172-5424 FSC:5340 CAGE:96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
width
1.000 INCHES NOMINAL IN
length
1.050 INCHES NOMINAL IN
material
COPPER ALLOY 172 AND COPPER ALLOY 170 OVERALL
hole_diameter
0.144 INCHES NOMINAL IN
overall_height
1.210 INCHES NOMINAL IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.024 INCHES NOMINAL IN
loop/holding_dimension
1.000 INCHES NOMINAL IN
distance_from_loop_center_to_end
0.605 INCHES NOMINAL IN
material_document_and_classification
QQ-C-533,ALLOY 172 FED SPEC 1ST MATERIAL RESPONSE AND QQ-C-533,ALLOY 170 FED SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-00-172-5424
COMPONENT DIAGRAM
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 1.000 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
HOLE DIAMETER: 0.144 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.024 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC 1ST MATERIAL RESPONSE AND QQ-C-533,ALLOY 170 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
LENGTH: 1.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP/HOLDING DIMENSION
1.000 INCHES NOMINAL IN
MOUNTING METHOD
UNTHREADED HOLE(S)
SURFACE TREATMENT
CADMIUM AND CHROMATE OVERALL
HOLE DIAMETER
0.144 INCHES NOMINAL IN
MATERIAL THICKNESS
0.024 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-C-533,ALLOY 172 FED SPEC 1ST MATERIAL RESPONSE AND QQ-C-533,ALLOY 170 FED SPEC 2ND MATERIAL RESPONSE OVERALL
LENGTH
1.050 INCHES NOMINAL IN
OVERALL HEIGHT
1.210 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END
0.605 INCHES NOMINAL IN
TEST DATA DOCUMENT
81349-MILC24066 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 416949-136?
416949-136 is a CLIP,SPRING TENSION.
What parts can replace 416949-136?
There are 19 known substitutes for 416949-136: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 16 more. Substitute compatibility should be verified for your specific system.
Is 416949-136 still available?
416949-136 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.