PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4116200-560
4116200-560 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, overall_width: 0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: COLORNATURL, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-530-6833, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4116200-560
NSN: 5340-00-530-6833
FSC: 5340
CAGE: 05869 — RAYTHEON COMPANY DIV RMD STRATEGIC (USA)
SPECIFICATIONS
diameter0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
overall_width0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_featuresCOLORNATURL
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
loop_inside_diameter0.562 INCHES NOMINAL IN
material_document_and_classificationASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.925 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.675 INCHES NOMINAL IN
NSN5340-00-530-6833
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4116200-560 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.675 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.925 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.050 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 0.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.675 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.925 INCHES NOMINAL IN
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.050 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.562 INCHES NOMINAL IN
OVERALL WIDTH0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SPECIAL FEATURESCOLORNATURL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
457-6209Upgraded Successor
successor cross-reference
successor
MS25281-F12Upgraded Successor
successor cross-reference
successor
10301187Upgraded Successor
successor cross-reference
successor
MS25281-F16Upgraded Successor
successor cross-reference
successor
SYMZ-70276 ITEM 3Upgraded Successor
successor cross-reference
successor
094406-0000Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4116200-560?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4116200-560?
4116200-560 is a CLAMP,LOOP.
What parts can replace 4116200-560?
There are 25 known substitutes for 4116200-560: 457-6209, MS25281-F12, 10301187 and 22 more. Substitute compatibility should be verified for your specific system.
Is 4116200-560 still available?
4116200-560 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4116200-560

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026