PartsTable
Technical Data Sheet
Download PDF

410-283 — 410-283

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

410-283: 410-283.

The 410-283 is a the manufacturer industrial component. Key specifications include material: WOOL SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.656 INCHES NOMINAL IN, special_features: RUBBER BAND ON OD OF CASE, housing_bore_diameter: 2.921 INCHES NOMINAL IN, sealing_element_style: VERTICAL-ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-599-7091, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
410-283
NSN: 5330-00-599-7091
NIINs: 005997091, 011074047
FSC: 5330 — Packing and Gasket Materials
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialWOOL SEALING ELEMENT A
case_styleSQUARE
seal_width0.656 INCHES NOMINAL IN
special_featuresRUBBER BAND ON OD OF CASE
housing_bore_diameter2.921 INCHES NOMINAL IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter1.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-599-7091
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 410-283 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.656 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
HOUSING BORE DIAMETER: 2.921 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.875 INCHES NOMINAL IN
•
MATERIAL: WOOL SEALING ELEMENT A
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.656 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL-ANGULAR
HOUSING BORE DIAMETER2.921 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
SPECIAL FEATURESRUBBER BAND ON OD OF CASE
ACCOMMODATED SHAFT DIAMETER1.875 INCHES NOMINAL IN
MATERIALWOOL SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
SUBSTITUTES & CROSS-REFERENCES 8
559D1-0632Reference document
Same NSN cross-reference
Reference document — Secondary reference
2879RXReference document
Same NSN cross-reference
Reference document — Secondary reference
1K1500P117Reference document
Same NSN cross-reference
Reference document — Secondary reference
11218HReference document
Same NSN cross-reference
Reference document — Secondary reference
373822Reference document
Same NSN cross-reference
Reference document — Secondary reference
11137ASReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 410-283?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 410-283?
410-283 is a 410-283.
What parts can replace 410-283?
There are 8 known substitutes for 410-283: 559D1-0632, 2879RX, 1K1500P117 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 410-283?
410-283 is cataloged in the U.S. Government catalog under NSN 5330-00-599-7091. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 410-283

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.