PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1K1500P117
1K1500P117 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: SQUARE, seal_width: 0.656 INCHES NOMINAL IN, special_features: RUBBER BAND ON OD OF CASE, housing_bore_diameter: 2.921 INCHES NOMINAL IN, sealing_element_style: VERTICAL-ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-7091, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1K1500P117
NSN: 5330-00-599-7091
FSC: 5330
CAGE: 98255 — DRS SUSTAINMENT SYSTEMS INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleSQUARE
seal_width0.656 INCHES NOMINAL IN
special_featuresRUBBER BAND ON OD OF CASE
housing_bore_diameter2.921 INCHES NOMINAL IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter1.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-599-7091
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1K1500P117 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 2.921 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.875 INCHES NOMINAL IN
•
SEAL WIDTH: 0.656 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
CASE STYLE: SQUARE
•
MATERIAL: WOOL SEALING ELEMENT A
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER2.921 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.875 INCHES NOMINAL IN
SEAL WIDTH0.656 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL-ANGULAR
CASE STYLESQUARE
SPECIAL FEATURESRUBBER BAND ON OD OF CASE
MATERIALWOOL SEALING ELEMENT A
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
12473Interchangeable
interchangeable cross-reference
interchangeable
SAC00065Interchangeable
interchangeable cross-reference
interchangeable
A1001Interchangeable
interchangeable cross-reference
interchangeable
DAN00024Interchangeable
interchangeable cross-reference
interchangeable
61898Interchangeable
interchangeable cross-reference
interchangeable
264800R91Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1K1500P117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1K1500P117?
1K1500P117 is a SEAL,PLAIN ENCASED.
What parts can replace 1K1500P117?
There are 32 known substitutes for 1K1500P117: 12473, SAC00065, A1001 and 29 more. Substitute compatibility should be verified for your specific system.
Is 1K1500P117 still available?
1K1500P117 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1K1500P117

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026