PartsTable
Technical Data Sheet
Download PDF

4067-70-034 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4067-70-034: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 2.230 INCHES MINIMUM AND 2.278 INCHES MAXIMUM IN, center_hole_diameter: 2.104 INCHES MINIMUM AND 2.124 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-101-8015, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4067-70-034
NSN: 5331-01-101-8015
FSC: 5331 — O-ring
CAGE: 77308 — PARCO, LLC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter2.230 INCHES MINIMUM AND 2.278 INCHES MAXIMUM IN
center_hole_diameter2.104 INCHES MINIMUM AND 2.124 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-01-101-8015
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4067-70-034 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.230 INCHES MINIMUM AND 2.278 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.104 INCHES MINIMUM AND 2.124 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.230 INCHES MINIMUM AND 2.278 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.104 INCHES MINIMUM AND 2.124 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
AS28775-034Reference document
Same NSN cross-reference
Reference document — Secondary reference
SR 832-75-034Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS28775-034Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
P48026-034Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2533405-34Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-034 N304-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 4067-70-034?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4067-70-034?
4067-70-034 is a O-RING.
What parts can replace 4067-70-034?
There are 8 known substitutes for 4067-70-034: AS28775-034, SR 832-75-034, MS28775-034 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4067-70-034?
4067-70-034 is cataloged in the U.S. Government catalog under NSN 5331-01-101-8015. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4067-70-034