PartsTable
Technical Data Sheet
Download PDF

2533405-34 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2533405-34: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 2.230 INCHES MINIMUM AND 2.278 INCHES MAXIMUM IN, center_hole_diameter: 2.104 INCHES MINIMUM AND 2.124 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-101-8015, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2533405-34
NSN: 5331-01-101-8015
FSC: 5331 — O-ring
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter2.230 INCHES MINIMUM AND 2.278 INCHES MAXIMUM IN
center_hole_diameter2.104 INCHES MINIMUM AND 2.124 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-01-101-8015
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2533405-34 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.230 INCHES MINIMUM AND 2.278 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.104 INCHES MINIMUM AND 2.124 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.230 INCHES MINIMUM AND 2.278 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.104 INCHES MINIMUM AND 2.124 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 7
AS28775-034Reference document
Same NSN cross-reference
Reference document — Secondary reference
SR 832-75-034Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS28775-034Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
P48026-034Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-034 N304-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
7377-034Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 2533405-34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2533405-34?
2533405-34 is a O-RING.
What parts can replace 2533405-34?
There are 7 known substitutes for 2533405-34: AS28775-034, SR 832-75-034, MS28775-034 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2533405-34?
2533405-34 is cataloged in the U.S. Government catalog under NSN 5331-01-101-8015. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2533405-34