PartsTable
Technical Data Sheet
PartsTable / MRO / 4030-9
4030-9 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

A Sandberg Design Cover effectively protects your phone against marks and scratches while also giving it a more personal look. Key specifications include material: STEEL ALLOY OVERALL, body_width: 1.641 INCHES NOMINAL IN, point_type: SPLIT, body_height: 2.266 INCHES MAXIMUM IN, body_length: 1.766 INCHES MAXIMUM IN, point_angle: 135.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-085-2345, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 4030-9
NSN: 5330-00-085-2345
FSC: 5330
CAGE: 77969 — RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. DBA RUBBERCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL ALLOY OVERALL
body_width1.641 INCHES NOMINAL IN
point_typeSPLIT
body_height2.266 INCHES MAXIMUM IN
body_length1.766 INCHES MAXIMUM IN
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length0.938 INCHES NOMINAL IN
recess_depth0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
body_materialMETAL
hole_diameter0.817 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
end_similarityNOT IDENTICAL
NSN5330-00-085-2345
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4030-9 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT CIRCLE DIAMETER: 3.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
•
CROSS-SECTIONAL THICKNESS: 0.177 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.500 INCHES NOMINAL IN
•
GAGE RING THICKNESS: 0.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
OUTSIDE DIAMETER: 4.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT CIRCLE DIAMETER3.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
CROSS-SECTIONAL THICKNESS0.177 INCHES NOMINAL IN
APERTURE DIAMETER2.500 INCHES NOMINAL IN
GAGE RING THICKNESS0.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY OVERALL
OUTSIDE DIAMETER4.500 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
40309Interchangeable
interchangeable cross-reference
interchangeable
65A81C938Interchangeable
interchangeable cross-reference
interchangeable
02261-0280-21Interchangeable
interchangeable cross-reference
interchangeable
68B618000-281Interchangeable
interchangeable cross-reference
interchangeable
4500-281Interchangeable
interchangeable cross-reference
interchangeable
65194Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4030-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4030-9?
4030-9 is a CONNECTING LINK,RIGID manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 4030-9?
There are 15 known substitutes for 4030-9: 40309, 65A81C938, 02261-0280-21 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4030-9?
4030-9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-085-2345. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4030-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026